Advertisement

Quick Links

CORDLESS
RADIO
18V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
AM Frequency:
522-1620KHz
FM Frequency:
87.5-108MHz
Auxiliary Jack:
3.5mm
Speaker Output:
3W
Weight:
0.6kg
ozito.com.au
WHAT'S IN THE BOX
Cordless Radio
PXRDS-300

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXRDS-300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXRDS-300

  • Page 1 WHAT’S IN THE BOX CORDLESS RADIO Cordless Radio 18V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Input: AM Frequency: 522-1620KHz FM Frequency: 87.5-108MHz Auxiliary Jack: 3.5mm Speaker Output: Weight: 0.6kg ozito.com.au PXRDS-300...
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION CORDLESS RADIO 1. BATTERY & CHARGING 1 Control Panel 5 LCD Display Screen 2 Speaker 6 Auxiliary Jack CAUTION: THE CHARGER fOR THIS PRODUCT SHOULD BE PROTECTED BY A RESIDUAL CURRENT DEvICE 3 Battery Compartment 7 Rear MP3 Player/Phone (RATED AT 30MA OR LESS).
  • Page 3: Battery Installation

    2. BATTERY INSTALLATION Installing the Battery Pack Charging your lithium ion battery - Eco Charger 1 Connect the charger into a mains power outlet. 1 Holding the radio housing, slide the 2 The charger LED will flash battery into the green showing power base of the radio is being supplied to the...
  • Page 4: Operation

    OPERATION 3. OPERATION On/off Switch Mode & Tuning 1. To turn the radio on, press Note: The time will still be shown the on/off switch once and on the LCD display even when 1. To alternate between AM or display will illuminate. radio is switched off.
  • Page 5: Setting The Time

    Up to 10 radio stations can be saved on both the AM and FM modes. Repeat steps 6 to 8 as necessary to program more stations to the radio’s memory. 9. After programming stations to memory, press the Channel button to search through the saved radio stations. PXRDS-300...
  • Page 6: Maintenance

    Blow out the ventilation slots with compressed air periodically . before the battery reaches optimum charge and run time. Note: Ozito Industries will not be responsible for any damage or Sparking visible through the housing air vents injuries caused by repair of the drill by an unauthorised person or by A small amount of sparking may be visible through the housing vents.
  • Page 7: Spare Parts

    This charger is not intended for any uses other than charging rechargeable batteries. Any other www.ozito.com.au or contact Ozito Customer Service: use may result in risk of fire, electric shock or electrocution.
  • Page 8 RADIO SAFETY WARNINGS WARNING! Keep the radio housing and handle dry, clean and free from grease and oil. Always use a clean cloth cleaning. Never use brake fluid, gasoline, petroleum-based products, or any strong solvents to clean your radio. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.
  • Page 9: Warranty

    • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO 0415 Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

Table of Contents