E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips). Xtreme Power Conversion Corporation Page 3...
The total electrical current used by XPD1415HV will be displayed on the digital meter in amperes. The audible alarm will sound when the load exceeds 80% of the rated load. In the event of an audible alarm, verify that the combined load does not exceed the rated load. Xtreme Power Conversion Corporation Page 4...
2. Install the XPD in a suitable horizontal location in the rack rail using four user-supplied mounting screws. 3. Connect the grounding lug of the XPD to a ground point on the rack rail. Xtreme Power Conversion Corporation Page 5...
3. Indicator light illuminates means that AC Power goes to socket outlets and Surge Protection function works. Do not use this device when Indicator light OFF. Xtreme Power Conversion Corporation Page 6...
2. Verify there are no circuit breakers tripped. 3. Call your dealer for assistance. If you cannot reach your dealer, or if they cannot resolve the problem, call Xtreme Power Conversion Corp Technical Support at 800.582.4524. Technical support inquiries can also be made at support@xpcc.com.
Any technical advice furnished by XPC Corporation or a XPC Corpora- tion authorized representative before or after delivery with regard to the use or application of Xtreme Power Con- version equipment is furnished on the basis that it represents XPC Corporations best judgment under the situation and circumstances, but it is used at the recipient’s sole risk.
This manual is also suitable for:
Spd-0215Xpd-at15aXpd815hvXpd1415hvXpd1420hvXpdu-iec...
Show all