Summary of Contents for HENX AS-DCG350
- Page 1 Operator’s Manual MODEL：AS-DCG350 Line READ CAREFULLY trimmer/Brush BEFORE USE KEEP FUTURE cutter Attachment REFERENCE...
-
Page 4: Safety Symbols
Read all instructions ! Safety Alert Indicates potential READ& UNDERSTAND person- al injury hazard. OPERATOR’S MANUAL Read & Understand To reduce the risk of Operator’s Manual injury, user must read under- stand operator’s manual before Residual risk! People with electronic devices, such as using this product. -
Page 5: Important Safety Instructions
machine; Kilogram Weight ◾ after striking a foreign object; ◾ Pound Weight whenever the machine starts vibrating abnormally. Direct Current Type or a characteristic ◾ of current Take care against injury to feet and hands from the cutting means. ◾ Always ensure that the ventilation openings are Rotates/Per Minute Revolutions per minute... - Page 6 Follow instructions for unauthorized attachments might be fitted to the changing accessories. Keep handles dry, clean, HENX line trimmer, their use may be extremely and free from oil and grease. dangerous, and/or damaging to the tools.
-
Page 7: Packing List
Never hold the cutting attachment above waist height. Cutting Mechanism Bump Head ◾ If situations occur that are not covered in this manual, use 3-teeth blade care and good judgment. Contact the HENX Service Center Line Diameter for assistance. ◾ Cutting Width of trimmer 35 cm Do not charge the battery pack in rain, or in wet locations. - Page 8 CONNECTING THE LINE TRIMMER ATTACHMENT TO THE performing any maintenance on the POWER HEAD line-cutting blade. This line trimmer attachment is designed for use with HENX Remove the line-cutting blade from the Power Head H36DG65. guard. See “ INSTALLING AN ATTACHMENT TO THE POWER HEAD’’...
-
Page 9: Operation
be careful not to cut yourself. bystanders, and pets. At a minimum, keep all children, bystanders and pets at least 15m away; there still may be risk to Carefully file the cutting edges of bystanders from thrown objects. Bystanders should be the blade with a fine-tooth file or encouraged to wear eye protection. -
Page 10: Storing The Unit
TRANSMISSION GEARS LUBRICATION The transmission gears in the gear case need be lubricated periodically with gear grease. Check the gear case grease level about every 50 hours of operation by removing the sealing screw on the side of the case. If no grease can be seen on the flanks of the gear, follow the steps below to fill with gear grease up to 3/4 capacity.
Need help?
Do you have a question about the AS-DCG350 and is the answer not in the manual?
Questions and answers