Troubleshooting - MidiLand MLi 750 Owner's Manual

TROUBLESHOOTING

SYMPTOM
No sound output.
No surround sound
effect when choosing
DVD/5.1 output mode.
Distortion occurred
when in high volume.
For further information or support, email us at tech@midiland.com or visit our FAQ
page at www.midiland.com.
Note:
1) Some DVD players have high level signal output . When the Master
Volume is too high and the distortion occurs, please turn down the
Master Volume to prevent damage to the speaker unit and amplifier.
2) You may not be able to enjoy 5.1 CH sound effect with this MLi-750 5.1
Home Theater Surround System if your DVD player does not come with
analog 5.1 CH output terminals.
POSSIBLE PROBLEM
1. System is not
connected to the wall
outlet.
2. The speaker cables
are not connected with
the output connectors.
3. The power is not
turned ON.
The audio setting of the
DVD player.
The sound device has
high level signal output.
- 12 -
1. Check with the
power plug.
2. Check the speaker
cables.
3. Make sure the power
switch located on the
rear panel is on.
Make sure that the audio
setting of the DVD
player is 5.1 CH.
1. Turn down the master
volume of the system.
2. Turn down audio
device s overall volume.