Table of Contents
Advertisement
∆ SETTING MAXIMUM ANGLE BELOW 900° ROTATION MODE
1.
Set the switch knob to the 900 degree position.
2.
Press the PROG button. The red LED will flash fast.
3.
Turn the wheel to the right/left at an angle of more than 60 degrees.
4.
Press the OPTIONS / 10 / MENU / + buttons, the red LED will light up continuously: the turned
angle will be set now as the maximum angle.
5.
Clearance of the maximum angle set:
Method A:
Press the OPTIONS / 10 / MENU / + buttons for 4s to cleared the maximum angle set.
Method B:
Press the PROG button. The red LED will flash fast. Turn the wheel from centre left/
right to 900 degrees (default maximum), press the OPTIONS / 10 / MENU / + buttons to return
to the default angle of 900.
∆ RESTORE STEERING WHEEL'S CALIBRATION TO DEFAULT
1.
Set the degree knob to "270" and press the L1 + L2 + R1 + R2 buttons: the LED will flash.
2.
Turn the wheel all the way to the left until the LED flashes slowly. Turn the wheel all the way to the
right until the LED flashes slowly. Turn the wheel back to the centre position: the LED will flash quickly.
3.
Fully depress the right pedal and the left pedal. LED will flash slowly.
4.
Press the OPTIONS button until the LED lights up continuously to set the default calibration.
12
K-Wheel Pro
User Manual
INDEX
Technical Specifications
K-Wheel Pro's buttons
Installation
Buttons configuration
Functions programming
∆ Introduction
∆ Program setup
∆ Clear single program
∆ Clear all programs
∆ Quit all programs
∆ Sensitivity adjustment
∆ Setting max. angle below
900º rotation mode
∆ Restore steering wheel's
calibration to default
∆ Foot pedals
∆ Gear lever buttons
Advertisement
Table of Contents
