Wem Specifications - Microtek Wireless Ethernet Systems Operation Manual

WEM SPECIFICATIONS

Power Injection Module
MECHANICAL
Physical
Dimensions
Weight
Interface
POWER
Power Requirements
Power-over-Ethernet (PoE)
Indicator
Connectors
ENVIRONMENTAL
Humidity
Operating Temperature
System Ranges
POINT-TO-POINT SYSTEMS_______
Up to 2500 Feet
Up to 2 Miles
Up to 12 Miles
Up to 30 Miles
Distance specifications assume an optimal environment (see pg ii for details)
MULTI-CONNECT SYSTEMS
Up to 500 Feet
Up to 1300 Feet
Up to 2500 Feet
Up to 1 Mile
Up to 6 Miles
Distance specifications assume an optimal environment (see pg ii for details)
*For product improvement, design and specifications are subject to change without notice.
(cont'd)
Plastic housing, not weatherproof
2.6" x 2.6" x 1.1"
2.5 oz
2 – RJ45 connectors
12 VDC 500 mA (wall transformer supplied)
PoE "mid-span" compliant (pins 4,5 positive – pins 7,8
ground)
LED - red
DC Jack 2.5 mm x 5.5 mm center positive, 2 – RJ45
95% non-condensing
-20F to +150F
Integral directional patch antennas on both WEMs
Integral directional 6 x 6 13-dBi patch antennas on both
Integral directional 6 x 6 13-dBi patch antenna on the Host
with integral directional patch antenna in 25 dBi dish
antenna on the Client
Integral directional patch antennas on both WEMs mounted
in 25 dBi dish antennas
Integral omni-directional patch antennas on both the Host
AP WEM & Client SU WEM
Integral omni-directional patch antenna on the Host AP
WEM & integral directional patch antenna(s) on the Client
SU WEM(s)
Integral directional patch antenna on the Host AP WEM &
Client SU WEM(s)
Integral directional patch antenna on the Host AP WEM &
integral directional 6 x 6 13-dBi patch antenna(s) on the
Client SU WEM(s)
Integral directional patch antenna on the Host AP WEM &
Client SU WEM(s) – Client SU WEM(s) mounted in 25 dBi
dish antenna(s)
- 20 -