Summary of Contents for Enable-IT 8908
- Page 1 Enable-IT 8908 - 8 Port Extended Gigabit Ethernet DSLAM Quickstart Guide All Rights Reserved © 1997 - 2019 Enable-IT™, Inc.
- Page 2 The Enable-IT 8908 Extended Gigabit Ethernet DSALM is designed to be deliver dedicated high speed Ethernet up to 24,000ft (7.31km) over 1-pair wiring from 8908 to 850 CPE. Therefore a site survey of the wiring and installation planning are highly recommended.
- Page 3 See the LED descriptions for a complete description of the LEDs. Step 2 – Custom setup the Enable-IT 8908 DSLAM The Enable-IT 8908 may be managed from a Web UI (PORT 2) or serial CLI (Serial). Launch a browser or telnet session and point it to 192.168.10.1...
- Page 4 Connect a 1-pair or better Interlink cable from your Enable-IT 850 CPE RJ-45 Interlink port to 1 of the 8 Ports on the Enable-IT 8908 DSLAM. Power up the Enable-IT 850 CPE with the provided 12V - 1A power adapter into a live AC outlet.
-
Page 5: Troubleshooting
Interlink Sync LED will be lit solid Green with rapid pulsing to show proper connection with the 8908. If the Interlink Sync LED Link is flashing slow to fast and never goes solid… Then follow the steps below: 1) Make sure your wiring is straight through and not connected to any Telco punch down blocks;... - Page 6 If you are experiencing performance issues with your Ethernet connection you may use the following DIP switch settings to adjust to your application. The 850 CPE can be controlled from the 8908 management web control for a centralized point for all 850 CPE.
-
Page 7: Technical Support
Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use this support website as your first source for help as it contains an on-line knowledge base of articles, documentation, FAQ's and other problem-solving resources. - Page 8 Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
- Page 9 2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT (INCLUDING...
- Page 10 Sales and Customer Care: Toll Free US and Canada 888 309-0910 866 389-8605 Fax Other International +1 702 924-0402 +1 702 800-2711 Fax E Mail sales@enableit.com support@enableit.com RMA Support: https://support.enableit.com All Rights Reserved © 1997 - 2019 Enable-IT™, Inc. Page ! of !
Need help?
Do you have a question about the 8908 and is the answer not in the manual?
Questions and answers