Lightspeed Redcat Acess Quick Start Manual

DETERMINE SET-UP LOCATION AND PLUG IN POWER SUPPLY
Good placement
avoid!
The Redcat Access can be set up on a cabinet or table-
top. If is it desired to be installed on a wall, please refer
to the User Manual.
POSITION THE FLEXMIKE AROUND
YOUR NECK AND POWER ON
the microphone on using the
Turn
ON/OFF button on the top of the
Flexmike. This will automatically turn
on the Redcat Access. When taking the
Flexmike off of the charging cable, it
will automatically power on and default
to mute (red LED).
ADJUST VOLUME AS NECESSARY
Microphone volume may be adjusted using the
UP/DOWN buttons on the side of the Flexmike.
Quick Start Guide
Best place ment
RE GI S T
E R
A U DI O
IN
MIN
M
A
X
AUDIO
(A L D )
O U T
MIN
M
A
X
O N/ O F
F
DC
INPUT
16V/2.0
A
Insert the DC connector into the DC INPUT on
the RCA and plug the other end into an electri-
cal output