Related Manuals for AAT KDH-C150MQR
Summary of Contents for AAT KDH-C150MQR
- Page 1 Proximity card and QR codes reader – Installation manual Installation Manual Mifare Card and QR Code Reader KDH-C150MQR Version 1.0 AAT Holding S.A. All rights reserved.
- Page 2 Proximity card and QR codes reader – Installation manual 1. Introduction KDH-C150MQR Proximity card reader and QR code reader type KDH-C150MQR QR codes is designed to work in access control systems. Reader can work with controllers with Wiegand interface. Readers allow to read the user identification number (UID) from Mifare Classic cards and QR code from the smartphone display or printed on a piece of paper.
- Page 3 Another way is to use any QR code generator. The QR code must contain only digits and cannot be longer than 10 digits. Note! To increase the security of the access control system, the KDH-C150MQR card reader should be installed on a guest-only passage. Other users of the system should not have permission to use this passage.
- Page 4 Proximity card and QR codes reader – Installation manual AAT Holding S.A. All rights reserved.