Q-Light S100E Operating Manual

S100E / S100E-FT / S125E / S125E-FT
OPERATING MANUAL
Bulb Revolving Warning Light
Thank you for purchasing Q.Light product.
Please read this manual carefully before installing this system
for safe and long use of the product.
▪ Low priced economical product with high efficiency in radiating
signal light.
▪ Volume(Buzzer Built-in Type) : 85dB(1m)
▪ RPM : 120-140/Min.(Controllable)
▪ Material : Lens-AS, Body-ABS, Reflector-Heat Resisting ABS
▪ Protection Class : IP23
1) S100E / S100E-FT
▪ General Specification
Rated
Model Current
Voltage
DC12V 0.720A 12V10W
S100E
DC24V 0.390A 24V10W
S100E
AC110V 0.087A 12V10W
-FT
AC220V 0.045A 12V10W
▪ External View Drawing
S100E
Bulb
Weight Color
T16x35 15S 9
Red-R
0.35Kg
T16x35 15S 10
Amber-A
T16x35 15S 9 Green-G
0.63Kg
Blue-B
T16x35 15S 9
S100E-FT
2) S125E/ S125E-FT
▪ General Specification
Rated
Model Current
Voltage
DC12V 0.720A 12V10W
S125E
DC24V 0.390A 24V10W
S125E
AC110V 0.087A 12V10W
-FT
AC220V 0.045A 12V10W
▪ External View Drawing
S125E
Power line UL1015-NO.16(1.25sq) x 2C 400mm comes out from
the product.
▪ In case of product using AC voltage, connect the line without
polarity(wire color).
▪ In case of product using DC voltage, black line is negative(-).
Indoor
▪ This product was manufactured with the structure for indoor use.
Installing in any direction is okay for indoor use.
▪ Outdoor use is limited at a place where no water or very little
water percolates. Mouning also should be done only with vertical
standing shape.
▪ Mount at the place where exists low vibration, low impact, low
moisture and low dust as long as possible.
▪ Refer to following information and drill necessary mounting holes
on proper part of the product.
(Make sure PCD from external view drawing.)
Bulb
Weight Color
T16x35 15S 9
Red-R
0.42Kg
T16x35 15S 10
Amber-A
T16x35 15S 9 Green-G
0.68Kg
Blue-B
T16x35 15S 9
S125E-FT
Outdoor