Advertisement
CONNECTING TO FIBRE
STEP1:
YOUR ONT
SETUP
PO TS 1 PO TS 2
YOUR OPTICAL
NETWORK TERMINAL
Your ONT (Optical
Network Terminal) will
have been installed on
an internal wall by the
fibre technician.
Connections A, B, C and
D will have been made.
STEP2:
YOUR ROUTER
SETUP
E
Power supply.
Ethernet cable plugged
F
into WAN port on your
router, and connected to
GE1 on the ONT.
Yellow Ethernet ports
G
to connect your PCs
and other network
(yellow cable).
The Phone1, Phone 2 and
H
DSL ports are not used for
a fibre connection.
0800 GET NOW
help@nownz.co.nz
D
RESE T
GE 1G
A
Optical fibre connection.
Power supply.
B
Ethernet cable (blue) plugged into GE1 on your ONT, and
C
connected to the WAN port on your router.
POTS1 supplies your NOW phone line (if applicable). This is
D
connected to either your phone or the back-feed jack point
installed by the fibre technician.
H
F
CONNECTING YOUR WIRELESS DEVICES TO THE ROUTER
The router comes shipped with the wireless fuction enabled so
there is no configuration necessary in order to use the wireless.
1. Ensure Wi-Fi is enabled on your device (eg. computer/
2. Scan for wireless networks in your area and connect to the
3. When prompted for your wireless security settings, enter the
C
E2
GE 3G
E4
G
smartphone/gaming console).
network name that matches the wireless network name found
on the base of your router.
wireless LAN key listed on the base of your router.
Wireless Security Settings
CHECK ON
THE BASE OF
Wireless Network Name (SSID)
SSID 5G: Huawei - 5G - N3Ka
ROUTER
SSID 2.4G: Huawei - 2.4G - N3Ka
B
A
PO WE R
E
H
Wireless LAN Key
abcdefhijk
Advertisement
