Related Manuals for TIC Airplay2 AMP88
Summary of Contents for TIC Airplay2 AMP88
- Page 1 TIC Audio Wi-fi Airplay2 installation instruction This manual is applicable for the TIC Wifi Airplay2 family, including the following compatible models: TIC Audio – Wi-fi Airplay2 installation instruction v1.4...
-
Page 2: Table Of Contents
1. Introduction In the below sections, when instructed to press a specific button on the TIC device, you can either aim the remote control at the speaker/amplifiers and press the button or press the respective button on the speaker/device itself if the specific button is available. - Page 3 TIC Audio Wi-fi Airplay2 installation instruction step2: Power on the TIC Wi-fi Airplay2 device. Hold the Wi-Fi button on your device or remote until the Wi-Fi indicator on TIC Wi-fi Airplay 2 device starts blinking. step3: Open the “WiiM Pod” app.
- Page 4 3 Choose the target device and click ‘Setup device is blinking. Otherwise, hold the wi-fi this Device’. button until the indicator is blinking and Note: each device has a different codename then click ‘Next’. TIC Audio – Wi-fi Airplay2 installation instruction v1.4...
- Page 5 4 Choose your wi-fi network and enter 5 Connecting the device to your network 6 Connected to your network the passcode of the network. Then Click 'Next' Note: Wi-fi name will be different in your environment TIC Audio – Wi-fi Airplay2 installation instruction v1.4...
- Page 6 TIC Audio Wi-fi Airplay2 installation instruction 7 Choose a device name from the list or enter a device name yourself TIC Audio – Wi-fi Airplay2 installation instruction v1.4...
-
Page 7: Introduction
TIC Audio Wi-fi Airplay2 installation instruction step5: Group or ungroup TIC airplay devices. 3 Finish grouping 2 Select all the devices you wish to group 1 Click button on any device you wish to together and Click ‘Done’ group Note: for ungrouping, unselect the devices you want to remove from the group. -
Page 8: Wifi Setup
4. Wired inputs In addition to wireless Wi-fi or Bluetooth inputs, TIC AMP series and WBR12 have 4 extra wired input options (HDMI, RCA, Optical, and USB) to easily broadcast non-wireless devices such as TV, radio, home-theater receiver, USB-drive, etc. You can use the remote control or the WiiM Pod app to select one of these wired input modes. -
Page 9: Important Notes
You will only need to use the app to set up the TIC wi-fi devices initially. After devices are connected to your network, the app is no longer needed for standard control and streaming. But please keep the app to update firmware, rename devices, troubleshoot etc.
Need help?
Do you have a question about the Airplay2 AMP88 and is the answer not in the manual?
Questions and answers