Advertisement
Assembly instructions
for the Advertising tower 40.130
constisting of:
- 8x Aluminium profiles à 1250 mm incl. 8 bores
- 8x Aluminium cross profiles with pointed screws for the lower and upper mounting
- 8x Aluminium cross profiles for the middle mounting
- 24x H-profiles à 789 mm to stabilize the panels.
- 4x Extension bolts for aluminium profile
8x
24x
8x
4x
System
exhibition
8x
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for IRUS 40.130
Summary of Contents for IRUS 40.130
- Page 1 System ® Assembly instructions exhibition for the Advertising tower 40.130 constisting of: - 8x Aluminium profiles à 1250 mm incl. 8 bores - 8x Aluminium cross profiles with pointed screws for the lower and upper mounting - 8x Aluminium cross profiles for the middle mounting - 24x H-profiles à...
- Page 2 System ® exhibition Important during assembly Pointed screws must be used for all profiles that have holes. 1. Mount the bottom cross profiles 2. Now mount the first middle cross including the pointed screws to profiles. form the corner. 4. Now mount the next first middle 3.
- Page 3 System ® exhibition 7. Push the top profiles onto the 5. Insert the bolts in the profile. bolts. Ensure that the holes face upward. 8. Now mount the second middle 9. Finally mount the last cross profile cross profile. including the pointed screws.
Need help?
Do you have a question about the 40.130 and is the answer not in the manual?
Questions and answers