Descaling; Moving The Product To Another Location - Samsung AIRDRESSER DF60 8 G Series User Manual

Hide thumbs Also See for AIRDRESSER DF60 8 G Series:
Table of Contents

Advertisement

Descaling

Using the steam function causes limestone accumulation and deposition throughout the internal water
circulation system due to calcium contents of water. To prevent this, perform descaling regularly to
increase the performance and lengthen the lifespan of the product. If you do not perform descaling
immediately after getting the notification message, some functions may be restricted for use and may
cause performance decrease or even shortens the lifespan of the product.
1. When the Descaling Required. Check the manual message appears on the display, remove all items
from the product and then tap and hold Drying and Delay End for 3 seconds.
2. Empty the Refill Tank and the Drain Tank.
3. Dilute a descaling agent with water as recommended by the manufacturer of a descaling agent.
4. Fill the Refill Tank with the diluted descaling agent up to the MAX line.
-
The maximum capacity of the Refill Tank is 1.4 litre.
5. Tap and hold
to start descaling.
-
If the Empty the Drain tank message appears on the display during descaling, empty the Drain Tank.
6. When the Check the Refill & Drain tanks message appears on the display, empty both the Refill Tank and
the Drain Tank, and then rinse them thoroughly.
7. Fill the Refill Tank with clean water up to the MAX line, and then insert the Refill Tank and the Drain
Tank. Tap
.
8. When descaling is complete, empty the Drain Tank and fill the Refill Tank with water.
-
You can use AIRDRESSER once you finish all these steps.
NOTE
• Vibration and noise may occur during the descaling process; this is normal, and there is no problem with
the product.
• You may see the Add water to Refill tank message when you use the product the first time after
descaling. This is normal. Fill the Refill Tank with water and tap
• Bubbles may form if the descaling agent is not rinsed thoroughly. Make sure to rinse the Refill Tank and
the Drain Tank thoroughly after descaling.
• Use a descaling agent dedicated for coffee machines.
• Do not use a descaling agent for other machines such as washing machine.
• Do not use laundry detergent or fabric softener for descaling.

Moving the product to another location

• There are two wheels underneath the product to assist moving it.
• To prevent the product from tipping over when moving the product, we recommend pushing the middle
of the product. Do not push the top or the bottom.
• Empty the Refill Tank and the Drain Tank before moving the product to another location. If the tanks are
not emptied, water can spill while moving the product.
Untitled-3 43
to resume.
English 43
2021-07-16
3:39:16

Advertisement

Table of Contents
loading

Table of Contents