Summary of Contents for Jasopels FarmCat JPC-100
- Page 1 JPC-100 manual 1 / 7 JPC-100 manual Pump controllers for JFC-100 FarmCat. Date: 2013-08-20...
-
Page 2: Table Of Contents
JPC-100 manual 2 / 7 Table of contents 1) FarmCat pump controller ....................3 2) Operation ......................... 3 2.1) Font label ........................3 2.2) LED .......................... 4 2.3) Keys ......................... 4 3) JFC-100 ”Radio Master” settings ..................5 4) JPC-100 firmware version history ..................6 5) Connection scheme –... -
Page 3: Farmcat Pump Controller
JPC-100 manual 3 / 7... -
Page 4: Led
JPC-100 manual 4 / 7 2.2) LED ”Active” LED light blinks once per second during normal operation. ”Active” LED light flashes constantly while setting the delay time or pump time. ”Radio activity” LED light blinks shortly when JFC-100 Master sends radio signals. ”Radio Master / Linked”: - Blinks shortly once per second when there is a radio connection to JFC-100 ”Radio Master”. -
Page 5: Jfc-100 "Radio Master" Settings
JPC-100 manual 5 / 7 JFC-100 ”Radio Master” setup JPC-100 pump controller is designed to synchronize against JFC-100 FarmCat ”Radio Master”. It is therefore necessary to change the settings of the JFC-100 to ”Radio Master” mode. Important: There can only be one JFC-100 set to ”Radio Master” mode in every shed. Setup of JFC-100 Radio Master: Activate the operation: - Hold both arrow keys down for 1,5 seconds. -
Page 6: Jpc-100 Firmware Version History
JPC-100 manual 6 / 7 JPC-100 firmware version history Date Init Ver. Description 2013-08-19 First version. Approved by Kurt Pedersen 2013-08-16 (at Jokertech) Revision reg. Pump LED (Esben Kristensen / Knud Tangsgaard). Technical data : Power supply 24VDC Relay output 24V ac/dc –... -
Page 7: Connection Scheme - Diagram
JPC-100 manual 7 / 7 Connection scheme – Diagram...