Timberline TR270 Instruction Manual

Topreach clamp

Advertisement

Quick Links

(406)755-4258
(406)257-2711
www.timberlinetool.com
90 Conestoga Ct. Kalispell, MT 59901 USA
Instruction
Model TR270
TopReach Clamp
For your personal safety
READ and UNDERSTAND
instructions before using tools.
Manual
SAVE these instructions
for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TR270 and is the answer not in the manual?

Questions and answers

Summary of Contents for Timberline TR270

  • Page 1 Instruction Manual Model TR270 TopReach Clamp (406)755-4258 For your personal safety (406)257-2711 SAVE these instructions READ and UNDERSTAND www.timberlinetool.com for future reference. 90 Conestoga Ct. Kalispell, MT 59901 USA instructions before using tools.
  • Page 2 800.735.6845 to obtain return authorization for repair. If inspection shows the trouble Table 2 : Rate of Closure is caused by defective workmanship or material, Timberline Tool will repair or, at our option, Maximum # of Revo- replace the product without charge.
  • Page 3 TIMBERLINE TR270 SERVICE INTRODUCTION Timberline squeeze-off tools are designed to temporarily stop the pressurized fl ow of Aft er every 10 uses: liquid or gas in polyethylene (PE) pipe. Apply a small amount of grease to the ACME Squeeze-off is a technique used to control the fl ow of gas or liquid in polyethylene thread.
  • Page 4 Fig 12 Safety fi rst. Timberline squeeze-off tools must be used by qualifi ed, trained per- sonnel only and must never be left on the pipe unattended. Refer to pipe manufac- When removing the tool from the pipe turn the Handle turers’...
  • Page 5 Failure to use the TR270 in the manner specifi ed in this manual may result in injury Ground the tool with the Grounding Rod. and/or permanent damage to the tool. Open the TR270 just enough to slide over pipe.
  • Page 6 Jaw (B8) matches the diameter and SDR of Familiarize yourself with all parts, names, and numbers. Refer to this the pipe. ( Fig 3) diagram for the assembly and operation procedures that follow. Fig 3 © 2008 Timberline Tool All Rights Reserved.

Table of Contents