Page 1
The T-31H was designed to provide the absolute best in electrodynamic headset listening : as such, it is a full-fledged member of the elite family of Talisman Audio equipments.
- make sure that the T-31H is placed on a hard surface with no vibrations ; - also make sure that the T-31H is not confined in a closed space, for the T-31H will remain in a power-on status full time ;...
B, IEC801-3 class A, IEC 801-4 class B. INSTALLATION First Power-Up Plug into the mains your T-31H for the first time without connecting it to your hi-fi equipment or to a headset. The display T-31H on the front panel must light up. Then unplug the unit from the mains and proceed with the installation as described here below.
T-31H T-31H Power On The T-31H does not feature an off/on switch, because it was designed to remain permanently on so as to and Off ensure optimal electrical and thermal operating conditions. Upon first power-on, or whenever your T-31H has been disconnected from the mains for a long time, it is recommended that you wait for about one hour before use.
This warranty applies to both materials and labor. In case of defect Talisman Audio will, for TWO years from the purchase date, repair the unit free of charge to the owner. Shipping costs to the Talisman Audio premises shall be however borne by the owner of the unit under warranty.