Download Print this page

SRC GPX-D150-04-02 Installation Instructions

Advertisement

Quick Links

Scope of Supply/Bill of Material & Mounting Drawings
Installation / Parts List / Bill of Material for Mounting
NO.
T op Rack
1
Taper Ring M6
2
Screw M6x25
3
Rubber Tape
4
Screw M8x85
5
6
Washer M8
7
Bush M8 18x18
8
Bush M8 15x10
9
Screw M8x40
10
Bottom Plat
Bush M8 18x50
11
SRC Design uses Met ric System of Measu reme nt and all dimensions in Millimeters
* Recommended to use the Torque specified in the table
**Deno tes Usage of Liquid Thread Locker in specified Locations
Copyright By SRC
Design and Specification are subjected to change
Part Number: GPX-D150-04-02
Part Description: Top Rack –GPX DRONE 150
Description
Quantity
Torque * (N-M)
1
4
4
Use Liquid Thread Locker
9 - 10
2
1
22 - 24
Use Liquid Thread Locker
3
2
4
2
Use Liquid Thread Locker
22 - 24
1
1
Rema rks **
Chack List
Page 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the GPX-D150-04-02 and is the answer not in the manual?

Questions and answers

Summary of Contents for SRC GPX-D150-04-02

  • Page 1 Bottom Plat Bush M8 18x50 SRC Design uses Met ric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the Torque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
  • Page 2: Mounting Drawings

    MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
  • Page 3: Mounting Installation

    STEP 2: Position the Mounting Rubber Tape Bottom Plat (4) – 2 off, as shown in the drawing, form the downside of the Rack. Copyright By SRC Design and Specification are subjected to change Page 3...
  • Page 4 Bush M8 15x10 (8) 4 off through the Mounting holes in the Top Rack and, tighten it to the torque . Rear Rack as shown “Final Assembled condition” Copyright By SRC Design and Specification are subjected to change Page 4...
  • Page 5 50 kilo meters of ride and at regular intervals. 7. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC 8. To the maximum extent possible, our design use the current Mounting/Fitment of the...