North American Tool 45063 Important Operating Instructions

6 INCH BENCH GRINDER
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often
contains chemicals known to
cause cancer, birth defects, or
other reproductive harm. Wear
protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
Important!
When using equipment, a few
safety precautions must be
observed to avoid injuries and
damage. Please read the complete
operating manual with due care.
Keep this manual in a safe place,
so that the information is available
at all times. If you give the
equipment to any other person,
give them these operating
instructions as well. We accept no
liability for damage or
For Customer Service, please call 1-800-348-5004 or
email feedback@natitools.com
accidents which arise due to non-
observance of these instructions
and the safety information herein.
CAUTION:
FOR YOUR OWN SAFETY,
READ INSTRUCTION MANUAL
COMPLETELY AND
CAREFULLY BEFORE
OPERATING THIS DRILL
PRESS
Any failures made in following
the safety regulations and
instructions may result in an
electric shock, fire, and/or
serious injury.
SAFETY INSTRUCTIONS
1) Read this manual carefully.
Learn the machine's limitations
and applications as well as the
specific hazards that can pertain
to it.
2) Keep guards in place and in
working order.
3) Keep the work area clean from
clutter and keep it well lit.
4) Do not use this tool in a damp,
wet or rainy environment.
Model: 45063
5) Do not force the tool to do
something it was not designed to
do. It will perform better and safely
if used in the way it was designed.
6) Do not wear loose clothing or
jewelry that could get caught in
moving parts. Keep long hair
pulled back.
7) Use safety glasses and wear
ear protection.
8) Keep the tool in proper working
order for the best and most safe
performance.
9) Always disconnect the tool
before performing maintenance or
changing accessories. Make sure
the tool is OFF before plugging
the tool back in to avoid accidental
starting.
10) Check for damage before
using the tool. If it is damaged in
any way, do not use it until
properly repaired.
11) Do not operate this tool while
under the influence of alcohol,
drugs or medication.
88045063 08/13