Electrolux CIV65344 User Manual page 12

12 www.electrolux.com
5.8 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.9 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
Touch for 4 seconds.
Deactivate the hob with
To deactivate the function: activate the
hob with
Touch for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds.
You can operate the hob. When you
deactivate the hob with
operates again.
5.10 OffSound Control
(Deactivating and activating the
sounds)
Deactivate the hob. Touch
seconds. The display comes on and
goes out. Touch
comes on. Touch
choose one of the following:
• - the sounds are off
• - the sounds are on
. Do not set any heat setting.
comes on.
.
. Do not set any heat setting.
comes on.
.
for 4 seconds.
the function
for 3
for 3 seconds.
of the timer to
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
.
• Count Down Timer comes down
• you put something on the control
panel.
.
5.11 Power management
• All cooking zones are connected to
one phase. See the illustration.
• The function activates when the total
electricity loading of the cooking
zones exceeds maximum electricity
loading of the phase.
• The function divides the power
between cooking zones.
• The function decreases the power to
the other cooking zones.
• The heat setting display of the
reduced zones alternates between the
chosen heat setting and the reduced
heat setting. After some time the heat
setting display of the reduced zones
stays on the reduced heat setting.
.
5.12 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on
basis of mode setting and temperature of
or
the hottest cookware on the hob. You
can also operate the fan from the hob
manually.
you can