General Guidelines Please read this manual before installing and operating this appliance accordingly. Failure to follow these instructions may result in a possible electric shock, fire Ÿ hazard, property damage, personal injury, or loss of life. This manual contains important safety information. Please keep it and hand it over when you transfer the product for future reference. Ÿ...
Tools Required: Bolt Perno Bolzen Bout Bult Boulon Wkręt Boulon Connecting piece Adjust connecting piece direction until it is properly lined up Insert bolt when connecting piece direction is properly lined Verbindungsbeschlag with the hole. Pièce de raccord Stellen Sie den Verbindungsbeschlag so ein, dass er wie im Setzen Sie erst dann den Bolzen ein.
Page 10
Tips / Hinweise / Notes / Suggerimenti / Sugerencias / Tips / Tips / Porady If there is any damage after unpacking or you have any questions during assembly, please feel free to contact us at Ÿ your earliest convenience. Our customer care team provides professional returns or exchanges as well as assembly guidance.
Page 19
× 2 × 4 Position your completed mantel close to its final location. Make sure you can access the back of the mantel as your electric fireplace appliance Ÿ will be installed from the back.
Page 21
Using a Phillips head screwdriver, remove the screws and the metal mounting center opening. Next, unpack the electric fireplace appliance carefully. Position the Ÿ appliance behind the fireplace with the front facing the wood mantel. With the help of an adult assistant, lift the appliance and gently slide it into the opening in the mantel.
GROUNDING INSTRUCTIONS: This fireplace is for use on 120 volt plugs. The cord has a plug as shown at (A) in figure 2. An adapter as shown at (C) is available for connecting three-blade Ÿ grounding-type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box.
Page 23
HEATER FLAME OPERATING INSTRUCTION FLAME/HEATER CONTROL SWITCH The flame/heater control switch can be accessed at the upper-right corner of the appliance. Ÿ FLAME The FLAME control switch turns the flame and the ember bed on and off. Ÿ When in the ON position, the flame and the ember bed turn on. Ÿ...
Need help?
Do you have a question about the VASAGLE LTV140 and is the answer not in the manual?
Questions and answers