Summary of Contents for Flight Display Systems FDCTRL-1
- Page 1 Document Number: Rev: Revision Date: 11/23/2011 MAN – FDCTRL-1 Page 1 of 10 FDCTRL-1 Installation and Operation Manual Controller Unit TECHNICAL SUPPORT 678-867-6717, or www.FlightDisplay.com...
- Page 2 Document Number: Rev: Revision Date: 11/23/2011 MAN – FDCTRL-1 Page 2 of 10 FDCTRL-1 Controller Unit © 2008 Flight Display Systems. All Rights Reserved. Flight Display Systems 1765 Grassland Parkway Alpharetta, GA 30004 678-867-6717 Phone 678-867-6742 Fax sales@flightdisplay.com www.flightdisplay.com For the most current copy of all product manuals, please visit our website at...
-
Page 3: Table Of Contents
Document Number: Rev: Revision Date: 11/23/2011 MAN – FDCTRL-1 Page 3 of 10 Table of Contents General Information ........................4 1. Front View ..........................4 Specifications ..........................5 1. Power ..........................5 2. Power and Ground Wiring ....................5 Power/Video ..........................6 Operations Instructions ......................7 Technical Support ........................7 Instructions for Continued Airworthiness ................7... -
Page 4: General Information
MAN – FDCTRL-1 Page 4 of 10 General Information The FDCTRL-1 is a Controller designed to allow a pilot to enter various information manually into an FD200CPU series Moving Map when the FMS/GPS is unable to output this data. Front View... -
Page 5: Specifications
Document Number: Rev: Revision Date: 11/23/2011 MAN – FDCTRL-1 Page 5 of 10 Specifications Display Type 16 Character LED Display Display Color Green Brightness Variable Controller Dimensions 3.61”(W)x1.11”(H)x5.75”(D) Controller Weight 12lbs. 9 oz. Power 9 oz. Function Controls Six Control Buttons... -
Page 6: Power/Video
Channel Select (+28V = CH 2 SEL; N/C = CH 1 SEL) Brightness Select (+28V = Brightness; N/C = Contrast) Increment Selection (+28V = Active; N/C = Inactive) Decrement Selection (+28V = Active; N/C = Inactive) Ground Ground *Saturation can be adjusted from front control panel of FDCTRL-1 only... -
Page 7: Operations Instructions
MAN – FDCTRL-1 Page 7 of 10 Operation Instructions After powering up, the unit will display “Flight Display Systems”, followed by firmware version and a brief loading delay. It will then be ready for use. Technical Support Should you have any questions concerning this product or other Flight Display Systems products, please contact our Product Support representatives at (678) 867-6717. -
Page 8: Technical Drawing
Document Number: Rev: Revision Date: 11/23/2011 MAN – FDCTRL-1 Page 8 of 10 Technical Drawing... -
Page 9: Warranty
If the return of the unit to the factory is required, an RMA number will be issued at that time. Flight Display Systems will, upon receipt of the failed hardware, remanufacture or replace the unit at our discretion. -
Page 10: Log Of Revisions
Document Number: Rev: Revision Date: 11/23/2011 MAN – FDCTRL-1 Page 10 of 10 Log of Revisions Date Page Description 07/29/2010 Initial Release New Format, added operating temperature, added technical 11/23/2011 drawing, updated pinout – added Ground to Pin 15, updated DO-...
Need help?
Do you have a question about the FDCTRL-1 and is the answer not in the manual?
Questions and answers