Advertisement
Quick Links
Includes:
A.
Spinner Base (1)
B.
Side Panel Connector (1)
C.
Reinforcement Panels (2)
D.
Side Panels (2)
E.
Pegboards (2)
F.
Topper (1)
G. Shelf (16)
H. 6" Hooks (16)
I.
Cross Dowels (8)
J.
Bolts (8)
K.
Allen Wrench (1)
Notes:
-
Two person assembly
-
Suggested tool: Flat Head Screwdriver
A
Spinner Base
E
F
Pegboards
Topper
INSTRUCTIONS: POPPUF
Puzzle Piece Floor Display
B
Side Panel Connector Reinforcement Panels
G
Shelf
19"W x 62"H
C
H
6" Hooks
I
Cross Dowels
D
Side Panels
J
Bolts
K
Allen Wrench
Advertisement
Related Manuals for P. Graham Dunn POPPUF
Summary of Contents for P. Graham Dunn POPPUF
- Page 1 INSTRUCTIONS: POPPUF Puzzle Piece Floor Display Includes: Spinner Base (1) Side Panel Connector (1) Reinforcement Panels (2) Side Panels (2) Pegboards (2) Topper (1) G. Shelf (16) H. 6” Hooks (16) Cross Dowels (8) Bolts (8) Allen Wrench (1) Notes: 19”W x 62”H...
- Page 2 Stand one Side Panel (D) upside down on floor. Note: Due to uneven top of Side Panel (D) this will require two people. Insert a Cross Dowel (I) into each circle opening in the Side Panel Connector (B). Assure the slits in the Cross Dowels (I) are parallel with the Side Panel Connector (B) openings, using a Flat Head Screw Driver.
- Page 3 Place Spinner Base (A), painted side down, on top of Side Panels (F) by aligning slots. Rotate bottom of Spinner Base (A) until pre-drilled holes are accessible. Place Bolts (D) in pre-drilled holes, then use Allen Wrench (E) to tighten. Note: If assembled correctly, Bolts (D) will interlock with Cross Dowels (C) for stability.
- Page 4 13. Place Shelves (G) on Pegboards (E) starting at the top vertical slot and working down.) 14. Place 6” Hooks (H) on Side Panels (D) starting at the top horizontal slot and working down (skipping second row and middle slots). 15.
- Page 5 Puzzle Pieces POPPUF-PUF8...