Westermann WS 800 Vario Operating Instruction

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

sweep & clean.

Scraper

WS 800 Vario

The new generation of scrapers.

Operating instruction

Table of Contents

Need help?

Do you have a question about the WS 800 Vario and is the answer not in the manual?

Questions and answers

Summary of Contents for Westermann WS 800 Vario

Page 1 & clean. Scraper WS 800 Vario The new generation of scrapers. Operating instruction...
Page 2: Table Of Contents
7.1 Assembly of push bar ............10 7.2 Disassembly and assembly of the scraper ........11 7.3 Adjustment of handle heigth ........... 12 7.3 Charging the WS 800 Vario ............13 8 Troubleshooting................. 14 9 Spare part lists................15 10 Warranty policity ...............
Page 3: Ec Declaration Of Conformity
D - 49716 Meppen declares under sole responsibility that the following product Westermann Scraper 800 (WS 800 Vario), to which this declaration relates, complies with the relevant basic health and safety requirements of EC Directive 89/392 / EEC and EMC Directive 89/336 / EEC.
Page 4: Legal Information
Subject to change: The Westermann GmbH & Co. KG reserves the right to change this document and the subject matter described therein at any time without prior notice, in particular to improve and expand it, provided...
Page 5: Important Basic Information
Important basic information Conventions 3.2.1 Symbols and signal words Symbol / signal word Meaning Indicates the handling and effects of the safety information. Alerts you to a dangerous situation that, if not DANGER avoided, will result in death or serious injury. Alerts you to a dangerous situation that, if not WARNING avoided, may result in death or serious injury.
Page 6 Important basic information 3.2.2 Pictogram overview The safety notes within these operating instructions, which may endanger persons and the machine if not observed, are specifically marked by the following pictograms. Pictogram Meaning General warning sign Warning of danger of falling Warning of automatic startup Warning of counter-rotating rollers (danger of being...
Page 7: General Information
General information Marking on the machine The Westermann scraper 800, WS 800 for short, is an akku driven scraper. A powerful DC motor and high-quality rechargeable batteries anables a powerful and long-term working with the machine, if it is maintained correctly.
Page 8: Safety
Safety Before use The WS 800 must be checked for possible damage or wear before any use. Only a flawless machine may be used. Please only use original spare parts or parts approved by the manufacturer for repairs and replacements. The operator must be at least 18 years old and is responsible for people and animals in the work area.
Page 9: Technical Data
Technical data General technica data of the WS 800 Vario DC motor: • 24V, 800 watts Battery/Accu: • 2x12V (24V), 44Ah Working width: • approx. 800 mm Basic machine: • Total weight approx. 130 kg (incl. scraper) • 2 drive wheels 16x6,5-8 •...
Page 10: Installation
Installation First of all, check your WS 800 for completeness! Assembly of push bar The WS 800 is shipped disassembled for an easier transport. You will find the basic machine, as well as 2 tires and the push bar. First you need to assemble the push bar with the included screws at the marked positions (Fig. 1). The upper screw is used for fixing as well as for adjusting the tilt of the push bar.
Page 11: Disassembly And Assembly Of The Scraper
Installation Disassembly / assembly of the scraper The preassembled scraper of the WS 800 can be attached or removed in two simple steps. First pull out both split pins that secure the scrapper to the forks (Fig. 2). Now the scrapper can be pulled on or of the forks. The WS800 has to be secured against rolling or tipping over during the diss-/ assembly.
Page 12: Adjustment Of Handle Heigth
Installation Adjustment of handle height There are two setting options to adjust the handle height to the height of the user. On the one hand, the inclination of the push bar can be adjusted using two adjusting screws (see Figure 3). The other adjustment is on the front of the WS 800.
Page 13: Charging The Ws 800 Vario
Installation Charging the WS 800 Vario A charger is integrated in the push bar of the WS 800. This is preset by production and does not require any further intervention. After finishing the work, the WS 800 must be parked near a power supply. Switch off the WS and prevent it from being switching on by unauthorized persons.
Page 14: Troubleshooting
Troubleshooting The following table lists common malfunctions and their remedies. Fault Cause Remedy Engine not • Battery empty • Charge battery running • Fuse is blown • Change fuse • Battery terminal without • Tighten the terminal contact screws • Oxidation on the terminal •...
Page 15: Spare Part Lists
Spare parts list Pos. WS 800 Vario...
Page 16 Spare parts list DETAIL A...
Page 17 Spare parts list Pos. Artikel Bezeichnung part name Menge LA-00-01057 Grundblech base frame LA-00-01058 Deckel cover LA-00-01059 Frontblende front panel LA-00-01060 Zinke Schieber pusher fork LA-00-01061 Rückwand backplate LA-00-01062 Holm handle bar LA-00-01063 Holm Unterseite handle bar cover LA-00-01064 Batteriehalter batterie holder LA-00-01079 Montageplatte Ladegerät...
Page 18 Spare parts list ASS 800...
Page 19 Spare parts list Menge/ Pos.-Nr. Artikel Bennenung part name quantity LA-00-00169 Grundblech ground plate LA-00-00170 Seitendeckel links side plate left LA-00-00435 Seitendeckel rechts side plate right LA-00-00171 Leiste vorne ledge front LA-00-00172 Leiste hinten ledge back KT-00-00226 Gummileiste vorne rubber ledge front KT-00-00595 Gummileiste hinten rubber ledge back...
Page 20: Warranty Policity
The operating instructions for the respective product as well as the safety notes must be observed. Damage caused by faulty operation, improper use or use of accessories not authorised by Westermann GmbH & Co. KG, cannot be accepted as a case of warranty.
Page 21 The invoice will also be issued if no warranty claim has been received by Westermann Customer Service within 4 weeks. If a Westermann spare part for warranty repairs is not avai- lable at short notice (within 2 working days) and you use an original Wester-...
Page 22 Gewährleistungsrichtlinie The warranty claim must be submitted to Westermann Customer Service no later than 5 working days after the repair has been performed to ensure a fast processing. Warranty claims received 3 months after repair can no longer be processed.
Page 23: List Of Figures
List of figures Fig. 1 - Assembly of push bar ............10 Fig. 2 - Disassembly and assembly of scraper ........11 Fig. 3 - Adjustment of handle height ..........13...
Page 24: Overview Maintenance
Overview maintenance Date Maintenance Done by...
Page 25: Notes
Notes...
Page 26 Notes...
Page 27 Notes...
Page 28 & clean. Westermann GmbH & Co. KG Schützenhof 23 D-49716 Meppen Phone: +49 (0) 59 31 / 4 96 90-0 Internet: www.westermann-germany.com E-Mail: info@westermann-radialbesen.de Your expert dealer...