Suneco ECO5326LD Series Manual

Advertisement

Quick Links

Please carefully read this manual before using the product
SUNECO PRODUCT STREETLIGHT
ECO5326LD Series
Manual
1

Introduction

LED Source:Use well-known LED chips, with multiple low power LED integrated modules, and Wide light-
emitting surface, uniform illumination and long lifespan.
Housing:Die-cast aluminum, Modern design with strong tempered -glass cover or PC Lens
Advantages:With PC lens, mild light, high light effect, quick start, radiation free.
Power supply:Inside
Application:City streets, pavements, squares, schools, parks, yards, residential areas, factories and any other places
where lighting is needed.
2

Appearance

With Tempered Glass Cover
3

Features

Energy efficient : This efficient solution lowers 50% energy consumption compared to traditional fixture.
Super Long lifespan: More than 50,000hrs
Good for health: No ultraviolet rays and infrared radiation;, no radiation, Gloss stability. without
affecting color life by years
Environment friendly:not harmful elements such as mercury and lead.
Eyesight Protection:DC Drives,No Flicker,No eye fatigue with long-term using.
Common luminaires usually use AC drives, Flicker follows.
High light effect:Entire lighting efficiency≥100lm/W
High Protection Class:IP65
Advantages:
1>Meet the requirements of 1:3.5 between the Pole Height and the spacing.
2> Adapt any angles of pole between 0~20°
3> Housing as the heat sink to improve the heat radiation and power performance
4> Convenient to replace with the separated LED box and E-box
With PC Lens

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECO5326LD Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Suneco ECO5326LD Series

  • Page 1 Please carefully read this manual before using the product SUNECO PRODUCT STREETLIGHT ECO5326LD Series Manual Introduction  LED Source:Use well-known LED chips, with multiple low power LED integrated modules, and Wide light- emitting surface, uniform illumination and long lifespan. ...
  • Page 2 5>Pole Diameter:Φ50/Φ60。  Firm and reliable:High-strength tempered glass + Die- casting Aluminum , convenient for transportation. Structure 1 Back cover 2 Power Supply 3 Heat sink 4 Frame for Glass cover 5 Tempered Glass 6 LED Module 7Lens Option without Glass Parameters Item Parameter...
  • Page 3 Average beam Angle 111.6° Installation Fix the LED street light on the pole first. Connect right the out-going wire of street lights according to the requirements. After check everything is ready, connect to the powerful supply. Then the street light can work properly.
  • Page 4 5 .While using the light the surface temperature will rise a little bit which is normal. 6 .Opening the glasses、reflector and heat sink is prohibited to avoid damaging the waterproof function of the light. Warning 1. Before installing, please make sure the light is complete. 2.

Table of Contents