Gladiator GCB100 Installation Instruction

ADC ACCESSORY DEVICE (Extended Busbar)
Applicable MCCBs: GCB100/150/250/400/600
• B e sure to read the manual and warning message for safety before
using products.
• T his manual should be given to the person who actually uses the
products and is responsible for their maintenance.
SAFETY PRECAUTION
• B efore installation, wiring, operation, maintenance and inspection of
the device, be sure to read the safety precautions carefully and follow
the message to ensure proper operations.
DANGER : Offending against the message will result in death or
serious injury.
: Offending against the message will result in minor
CAUTION
injury or physical damage.
DANGER
• T urn off the power before starting mounting, dismounting, wiring,
maintenance or inspection. Failure to do may result in electric
shocks and burns.
GCB100 Pole
2P
3P
GCB100
Installation Instruction
CAUTION
1. Do not use any deformed or damaged device.
2. Mounting, detaching, wiring, maintaining and checking should be
done by an authorized or certified person.
3. It should not be used in severe environment such as high
temperature, high humidity, dusty, corrosive gas, excessive
vibration and impulse.
They may result in fire or malfunction.
4. Use the device in a range of the rate current and pole of MCCB.
5. Mounting should be done according to the instruction manual.
Failure to mount may cause malfunction of MCCB or cause an
incident which may make the operator hurt.
6. Please tighten the terminal screw in proper torque to prevent
overheating.
7. Each crimp terminal or conductor pole should be connected
parallel.
8. When using the extended busbar, fit interphase barriers between
terminals. If the breaker has no interphase barrier insulate the
exposed part of the terminals or conductors with insulation
sleeves tape or coating.
9. Be cafeful not to be damaged by accidents during transportation
or installation.
10. Do not modify the device unless it is permitted.
11. When the device become useless, it should be disposed of them
as an industrial waste.
Size A Size B
Feature
Inch mm Inch mm
1.78 45.0 0.98 25.0
1.38 35.0 0.98 25.0
GCB150 Pole
Inch
2P 1.77
3P 1.77
GCB150
GCB250 Pole
Inch
2P 1.77
3P 1.77
GCB100/150/250/400/600
(GCBX2/3-PBR-STD)
Size A Size B
Feature
mm Inch mm
45.0 1.38 35.0
45.0 1.38 35.0
Size A Size B
Feature
mm Inch mm
45.0 1.38 35.0
45.0 1.38 35.0