Advertisement
Vermont Castings GPF
The logs are fragile. Use caution when placing
the cover on, or removing the cover from, the unit
to avoid damaging the logs.
8
Log C2
Log C1LG162aFig. 11 Place log C1 on locator pins on burner.5. Move around so that flex line is now on your right.Place log C2 with 'Y' part of log toward the outside ofthe burner ring. Left part of 'Y' will slightly over hangburner ring. (Fig. 12)6. Place logs C3 and C4 with flex line on your left. C3fits just under angle of log C2. (Fig. 13)7. Log C4 rests with ends of 'Y' section on burner ring.Top of log rests on log C2.8. Flex line on right. Place log C5 with the notch at thetop resting next to log C3. (Fig. 14)9. Flex line on left. Place log C6 so the top of the log isover log C3 and bottom of log is over corner of theburner pan. (Fig. 15)
CAUTION
Log C1
Fig. 13 Logs C3 & C4 placement.
Log C4
Log C2
Fig. 14 Log C5 placement.
Log C5
Log C4
Log C1
LG166a
Fig. 15 Log C6 placement.
Log C4
Log C2
Log C3
LG164a
Log C5
Log C1
LG165a
Log C6
Log
C2
Log C3
Advertisement
