Specifications - Magnavox 42MF 230A User Manual

NOTE:
*This model complies with the specifications listed below.
*Designs and specifications are subject to change without notice.
*This model may not be compatible with features and/or specifications that may be
added in the future.
Television System:
NTSC standard
ATSC standard (8VSB)
Channel Coverage:
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
Power Source:
100 -240V, 50/60 Hz
Power Consumption
450 W (on average)
1 W in standby mode
(power cord plugged in and power OFF)
Audio Power
5 W + 5 W, Internal Speaker
Video/Audio Terminals:
Side AV include 1 Group:
S-Video/Video/Audio Input
Rear AV include 1 Group:
S-Video/Video/Audio Input
S-VIDEO INPUT:
Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms)
Video/Audio Output:
VIDEO: 1 V(p-p), 75 ohm, negative sync
AUDIO: 150 mV(rms)
NOTE: This TV does not provide ATSC TV/S-VIDEO/HD/VGA/DVI Output.

Specifications

Component INPUT:
Rear Component include 2 Groups:
Y : 1V(p-p), 75 ohm
Pr/Cr: 0.7 V (p-p), 75 ohm
Pb/Cb: 0.7 V (p-p), 75 ohm
AUDIO: 150 mV (rms)
Suggested resolutions: 1080i, 480p, 480i, 720p
DVI Terminals:
DVI INPUT:
Rear DVI include 1 DVI-D Input
HDCP compliant
E-EDID compliant
Suggested scan rates: 1080i/60Hz
VGA Terminals:
VGA INPUT:
Rear VGA include 1 D-SUB 15 Pin Input
E-EDID compliant
Suggested scan rates: 640X480/60Hz,
Dimensions:
Without Stand: Width: 1038 mm
Include Stand: Width: 1038 mm
Weight:
35.5 kg (Without Stand)
43 kg (With Stand)
Supplied Accessories:
1pcs power cord
1pcs remote control
(with two *AAA*sized alkaline batteries)
Wall Mouting :
12
480p/60Hz
720p/60Hz
800 X 600/60Hz,
1024X768/60Hz
Height: 660 mm
Depth: 82 mm
Height: 726.5 mm
Depth: 270mm
Optional