Operating Your Refrigerator; Temperature Control; Changing The Light Bulb - Magic Chef MCBR1010S Instruction Manual

OPERATING YOUR REFRIGERATOR

Temperature Control

Your refrigerator has one control for regulating the
•
temperature. The temperature control is located on the
top left hand corner of the refrigerator compartment.
The first time you turn the unit on, adjust the temperature
•
control knob to "MAX" and run for at least 2 hours before
putting foods inside. This will ensure the cabinet is
thoroughly chilled before food is put in.
The range of the REFRIGERATOR temperature control is
•
from position "MIN" the warmest to "MAX" the coldest.
Adjust the temperature control to the setting that best
suits your needs. The setting of "MED" should be
appropriate for home or office refrigerator use.
• NOTE;
If the unit is unplugged, loses power; you must wait 3 to 5 minutes before restarting the
•
unit. If you attempt to restart before this time delay, the refrigerator will not start.
Large amounts of food will lower the cooling efficiency of the appliance.
•
Do not place the foods on the air outlet, and leave spaces for airflow.
•
If you choose to change the thermostat setting, adjust thermostat control by one
•
increment at a time. Allow several hours for temperature to stabilize between
adjustments.
Adjusting the temperature control in the refrigerator compartment will affect the
•
temperature in both the refrigerator and the freezer compartment.

Changing The Light Bulb

Before removing the light bulb, turn off the refrigerator first
and then unplug the unit from the wall outlet. Failure to do so
could result in electrical shock or personal injury.
Use Phillips screwdriver to take out screw.
•
Remove the light cover by pulling downwards gently
•
Unscrew the bulb
•
Replace with a 15 watt-refrigerator bulb that is the same
•
shape and size.
Replace the light bulb cover and tighten screw.
•
6