Advertisement
Quick Links
Advertisement
Summary of Contents for M Solutions MS-4K71-12TR
- Page 1 User Guide MS-4K71-12TR Integrated UHD Tracking Camera Revision: 1.0 - March 2022...
-
Page 2: Table Of Contents
MS-4K71-12TR USER GUIDE Contents Introduction Key Features Connectivity Overview (Host and Device) Understanding the LED’s Cabling for HDBaseT Audio RS-232 Control & Power Specifications & Package Contents Schematic Notices • This MSolutions product contains electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. -
Page 3: Introduction
For example, lecturer and audience, classroom - the fixed Panorama camera targets the blackboard and the PTZ camera tracks the lecturer. The MS-4K71-12TR Conference Camera streams high quality image at 4K (3840x2160), allows a 71 degree field of view, and 12x optical zoom. Even under poor light conditions, the camera will adjust automatically to stream vivid video quality thanks to its automatic low-light correction technology. -
Page 4: Connectivity Overview (Host And Device)
MS-4K71-12TR USER GUIDE Connectivity Overview... - Page 5 MS-4K71-12TR USER GUIDE Product Installation When the monitor thickness is >170mm or when it is required to be mounted on a wall, the wall mounting method can be selected. The specific installation steps are shown in the following figure.
- Page 6 MS-4K71-12TR USER GUIDE Interface and Buttons Network Interface USB 2.0 Interface RS232 IN Interface RS232 OUT Interface RS485 Interface HDMI Interface LINE IN Interface 3G-SDI Interface USB 3.0 Interface DC 12V Interface Power Switch Dimensions...
- Page 7 MS-4K71-12TR USER GUIDE Remote Control Key Description 1. Standby Key Press this button to enter standby mode. Press it again to enter normal mode. Note: Power consumption in standby mode is approximately half of the normal mode 2. Number Key To set preset or call preset.
- Page 8 MS-4K71-12TR USER GUIDE Remote Control Key Description 16. Backlight Key BLC ON/OFF: Press this button to enable the backlight compensation. Press it again to disable the backlight compensation. NOTE: • Effective only in auto exposure mode. • If a light behind the subject, the subject will become dark. In this case, press the backlight ON/OFF button.
- Page 9 MS-4K71-12TR USER GUIDE Serial Communication Control • RS232 Communication Control The camera is controlled via RS232. The RS232 serial port parameters are as follows: Baud rate: 2400/4800/9600/38400; Starting position: 1 bit Data bit: 8 bits Stop bit: 1 bit Check digit: None •...
- Page 10 MS-4K71-12TR USER GUIDE GUI Settings COLOR Move the main menu cursor to [COLOR], and press [HOME] key enter the color page, as shown in the following figure. WB-Mode: White balance mode, optional items: Auto, Indoor, Outdoor, One Push, Manual, VAR. RG Tuning: Optional items: 0 ~ +10 (Effective only in Auto mode);...
- Page 11 MS-4K71-12TR USER GUIDE GUI Settings COMMUNICATION SETUP Move the main menu cursor to [COMMUNICATION SETUP], and press [HOME] key enter the communication setup page, as shown in the following figure. Protocol: Control protocol type, optional items: Auto, VISCA, PELCO-D, PELCO-P. V_Address: Optional items: 1 ~ 7. (Effective only in Auto, VISCA protocol).
- Page 12 MS-4K71-12TR USER GUIDE Network Function Camera Controlled by LAN Setup IP Address If you don’t know camera IP, view as below: Method 1: Press * and # and 4 on remote controller one by one, the camera IP address will be shown on screen.
- Page 13 MS-4K71-12TR USER GUIDE Network Function Change IP Address Step 1 Search the IP address of camera. Step 2 Select the camera IP of you want to change. Step 3 Select the config dialog of upgrade applets. Step 4 Change the IP address, netmask and gateway, then click “Set” .
- Page 14 MS-4K71-12TR USER GUIDE Network Function Dynamic DNS Visit Camera Set domain name to camera, setup the parameter, then dynamic DNS can access camera. Access link: http:// hostname: port number. For example, setup host computer name: youdomain.f3322.org, the camera port number is 89, the access link should be http://youdomain.3322.org:89.
- Page 15 MS-4K71-12TR USER GUIDE Network Function PTZ Setup 1) Pan and Tilt Control Up, Down, Left and Right arrows and the home button allow you to manually drive the camera to the desired position. 2) Zoom Zoom In and Zoom Out buttons allow for wide or narrow view of the space.
- Page 16 MS-4K71-12TR USER GUIDE Network Function Video Settings Set domain name to camera, setup the parameter, then dynamic DNS can access camera. Access link: http://hostname: port number. For example, setup host computer name: youdomain.f3322.org, the camera port number is 89, 1) Encode Level Support baseline, mainprofile and highprofile three levels.
-
Page 17: Audio
MS-4K71-12TR USER GUIDE Network Function Image Settings 1) Brightness Image bright 0 ~ 14, slider control, on the right shows the corresponding numerical. Default value is 7. 2) Saturation Saturation 0 ~ 14, slider control, on the right shows the corresponding numerical. - Page 18 MS-4K71-12TR USER GUIDE Network Function System Settings 1) Work Mode The default work mode is RTSP. Optional items: RTSP, SDK, Multicast. 2) Reboot Click the “Reboot” button, system restart. 3) Username and password The user can modify the password (letters and Numbers only).
- Page 19 MS-4K71-12TR USER GUIDE Maintenance and Troubleshooting Camera Maintains • If camera will not be used for a long time, please turn off the power switch, disconnect AC power cord of AC adaptor to the outlet. • Please use soft cloth or tissue to clean the camera cover.
-
Page 20: Usb
MS-4K71-12TR USER GUIDE Specifications Device Host • USB-C connectivity: 1 x USB-C (female) - • USB-C connectivity: 1 x USB-C (female) - peripheral host • USB control: 1 x Micro USB (female) • USB control: 1 x Micro USB (female) •... - Page 21 www.m4sol.com...