BEAUTME BM1B Product And Installation Manual

Step 4. Two Ways Of Connection
1. connect to power source 2. Through the connector provided, here is how:
directly by using the plug
installed
Operating Instruction
OFF ON
Turn on or off the anti-fog
function
Touch to switch White Light /
Natural Light / Warm Light
Notice
For warranty , please kindly contact us for return policy if any issues happen.
(1) Please read the instructions carefully before using.
(2) Make sure that your charging device is adequate for the mirror voltage rating before
using.
(3)Turn off the power and avoid direct sunlight if not used or stored for a long time. Far
away from children's access.
(4) Please do not disassemble or remodel mirror, and keep it away from sharp things.
(5) Please do not use corrosive liquids to clean the mirror.
(6) Please do not violently throw, hit and rub mirror.
(7) Do not approach or put the product into the fire in case of fire or explosion.
(8) Please stop using it immediately if an abnormality occurs.
a. remove the plug by pull up the buttons of
the connector
b. connect the wire from your home power
source to one end of the connect
c. make sure all wires settled firmly
OFF ON
Turn on or off the LED lights
Long press to adjust light
brightness
45mm
/ 1.8"
1 4 6 m
4 0 0 m
m / 5
. 7 "
1 0 1 6 m m
/ 4 0 "
. 7 "
m / 1 5