Page 2
1. Using the supplied RJ45 cable (or any RJ45 network cable) EPS 4XM, 8XM or ElecGuard system, for example: link one of the xBus connector of the ePowerSwitch 1XS to http://192.168.100.202/sysadmin.htm one of the xBus connector on ePowerSwitch 4XM, 8XM or 2.
Page 4
à l'aide d'un câble réseau RJ45 standard. apparaît et vous permet de configurer votre appareil. 2. Allouez une adresse à chaque ePowerSwitch 1XS en 3. Cliquez sur l’onglet Settings puis sur Peripherals. positionnant les micro-interrupteurs marqués "Slct" sur la Cette page affiche tous les périphériques connectés.
Need help?
Do you have a question about the ePowerSwitch 1XS and is the answer not in the manual?
Questions and answers