Step 4 – Mount Binder Holder to Floor ......................4 Before You Begin Read all instructions prior to assembling or installing any Kargo Master product. Always locate your installation locations prior to performing any work. ENSURE SAFETY WHILE INSTALLING OR DRILLING INTO VEHICLE.
Instructions – 40291 Step 1 – Find Mounting Location There are holes in both sides and the rear of binder/bin holder to allow for a variety of mounting positions. Determine installation location. We recommend installing binder/bin holder to the side of shelf or to a partition in addition to the floor.
Instructions – 40291 Step 3 – Mount Binder/Bin Holder to Shelf At each location marked on shelf or other mounting location, drill through surface using a 9/32” drill bit. Using four 1/4” x 1” Phillips head screws, eight 1/4” flat washers, and four 1/4”...