Product Specifications; Vibration Level; Battery And Charger - Ryobi RCS1830BLX4 Original Instructions Manual

PRODUCT SPECIFICATIONS

Cordless chainsaw
Model
Rated voltage
No-load speed
Guide bar length
Usable cutting length
Chain pitch
Drive links
Drive sprocket
Chain oil tank capacity
Weight (without battery pack, with
guide bar, chain, and empty tank)
Vibration level (in accordance with EN 60745-1 & EN 60745-2-
13)
Front handle
Rear handle
Uncertainty of measurement
Noise emission level (in accordance with EN 60745-1 & EN
60745-2-13)
A-weighted sound pressure level
at operator's position
Uncertainty of measurement
A-weighted sound power level
Uncertainty of measurement
Sound power level (in accordance with ISO 3744)
Measured sound power level
Guaranteed sound power level

BATTERY AND CHARGER

Model OCS1830BL
Battery pack -
Weight -
Charger -
Compatible battery RB18L13, RB18L15, RB18L20, RB18L25,
packs RB18L26, RB18L40, RB18L40A,
RB1840C, RB18L50, RB18L60A,
Compatible BCS618, BCL14181H, BCL14183H,
Chargers *BCL1418IV, RC1185, RC18120,
For best performance, use RYOBI 6.0 Ah and 9.0 Ah battery
packs.
*The compatible charger is for charging in vehicles with 12 V DC
outlets.
OCS1830BL/
RCS1830BLX4
18 V d.c.
10 m/s
305 mm
250 mm (10 in.)
9.525 mm (0.375 in.)
45
6 teeth x 0.375 in.
210 mL
3.2 kg
4.0 m/s
2
6.6 m/s
2
1.5 m/s
2
83.1 dB(A)
2.5 dB
94.1 dB(A)
2.5 dB
93.5 dB(A)
96 dB(A)
RCS1830BLX4
RB1840C
0.72 kg
RC18115
RB18L90A,
RC18150, RC18627
REPLACEMENT PART (BAR AND CHAIN)
Manufacturer OREGON
Bar 591057
Chain 90PX045XTT
The chain must be fitted with a bar from the same
manufacturer according to the above combinations.
MAINTENANCE
Chainsaw file

VIBRATION LEVEL

WARNING
The declared vibration total values and the declared
noise emission values given in this instruction manual
have been measured in accordance with a standardised
test and may be used to compare one tool with another.
They may be used for a preliminary assessment of
exposure.
The declared vibration and noise emission values
represent the main applications of the tool. However,
if the tool is used for different applications, used with
different accessories, or poorly maintained, the vibration
and noise emission may differ. These conditions may
significantly increase the exposure levels over the total
working period. An estimation of the level of exposure to
vibration and noise should take into account the times
when the tool is turned off or when it is running idle.
These conditions may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and noise, such as
maintaining the tool and the accessories, keeping the
hands warm (in case of vibration), and organising work
patterns.
POWERFIT
PCB1245050
PWFTCA1201
5/32 in. (4.0 mm)