Roberto Sport CHAMPION SIX COVER Assembly Instructions

Advertisement

Quick Links

Thank you for choosing one of Roberto Sport's products. Our tables are famous for their quality and accuracy
of their components. Roberto Sport has been producing table soccer, pool and hockey tables for more than 65
years. Huge experience and tradition, constant research and innovation have brought Roberto Sport's name as
a synonymous of the "Made In Italy" football tables all over the world.
Unpacking and assembly operation should be carried out entirely by adults. Keep children away throughout all
steps. All small parts such as bolts, screws etc., not yet assembled, and nylon bags might be swallowed or
inhaled.
The model you just bought is for INDOOR USE. For this reason we suggest you to install it in sheltered
environment, with low humidity degree and direct sun bean free.
In order to keep your tables performance at a high level, we suggest you clean it periodically by using a humid
dust cloth. For difficult stain you may use abrasive-free detergents. For an utmost sliding rods: we suggest you
get the external part of the rod lubricated (the one in touch with the bushing) along with the rod's internal
part by using a silicon spray. Roberto Sport uses and supplies a special silicon spray studied, produced and
tested for these purposes. Do not use grease; it holds the dust and might block the rod sliding. The telescopic
rods assembled on this table are of a highly safe. To prevent rods bending, we recommend you do not load
weight on the rods when extended.
For any problem you might have, or any info you might need, do not hesitate to visit our web site:
www.robertosport.it or contact us at:
Roberto Sport has a two- year warranty for its products starting from the acquisition date. Warranty covers
manufacture defects only; it doesn't cover damages caused by misuse or assigned to be due to wear & tear. A
manufacture defect must be reported at the earliest by a written communication within two months. A written
notification must be sent to the vendor. Roberto Sport is committed to restore the table with no charge on the
buyer by repairing or replacing the damaged part/parts or by offering a discount.
Roberto Sport srl
Via A. Casale 63/A (Zona Industriale), 10010 Lessolo, TO – Italy - P.I. 05961970018
Tel. +39 0125 58848 - Fax +39 0125 58851
e-mail:
info@robertosport.it http://www.robertosport.it
CHAMPION SIX COVER

GENERAL WARNINGS

CARE & MAINTENANCE
sales@robertosport.it

WARRANTY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CHAMPION SIX COVER and is the answer not in the manual?

Questions and answers

Summary of Contents for Roberto Sport CHAMPION SIX COVER

  • Page 1 A written notification must be sent to the vendor. Roberto Sport is committed to restore the table with no charge on the buyer by repairing or replacing the damaged part/parts or by offering a discount.
  • Page 2 PARTS LIST Lubricant spray Balls Scoring unit Material for legs assembly Iron crossbar Iron legs Locknut diam. 10mm Metal flat 10x30 Screw 8x120 (for crossbar) Plastic flat Foot diam. 80 Metal flat 12x32 L allen spanner Material for rods Screw 5x20 Set complete of rods Material for aluminium border top Screw 4,5x16...
  • Page 3 ASSEMBLY INSTRUCTIONS The football table is packed in a carton box with the rods and legs to be assembled. The assembly operation is very simple and needs about 45 minutes. To start please follow the below instructions. Please read and keep these instructions for future reference. This table is sent out with glass cover.
  • Page 4 Fixing the coin mechanism Rods assembly...
  • Page 5 Fixing the aluminium border top Metal part for ball exit and top cover assembly...

Table of Contents