Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Tescom TM845
- Page 1 TESCOM Mixer User manual TM845...
-
Page 2: Shipped Components
Shipped components Mixer Bottle Safety switch pin Maximum (1000ml) Surface 750ml 500ml Safety switch pin Minimum (300ml) Packing Back Rubber cover Cutter Bottle stand Installation guide Safety switch pin Match Safety switch Power code Power plug cover Power plug Power switch Bottom reset button Flash switch... -
Page 3: Installation
Installation 2. 1 Assembly/Disassembly Lay the assembly in the order shown below Disassemble by turning the bottle stand as shown below Mixer bottle Bottle stand Packing Match Cutter Bottle stand Body Installation guide WARNING • Fix the packing firmly • Handle the cutter safely •... - Page 4 Installation 2. 2 Storage You can store the mixer bottle compactly as shown below Handle Groove Body WARNING • Store the body after drying • Firmly remove the oil on the lid...
-
Page 5: Operation
Operation 3. 1 How to use the mixer 1. Put the material in the mixer Maximum amount Minimum amount 2. Confirm that the power switch is set to “Off” 3. Fit the recess of the bottle base with the protrusion of the main body 4. - Page 6 Operation 4. Press the flash switch several times with a length of about one second Off On Flash 5. Turn on the power switch Flash 6. Turn off the power switch when it becomes your favorite condition Flash...
-
Page 7: Maintenance
Maintenance 4.1 Mixer bottle/Packing 1. Put lukewarm water to one third 2. Put a few drops of detergent to operate 3. Remove them and wash them 4. Drying 4.2 Body • Wipe off the soiling with a soft cloth... - Page 8 Maintenance 4.3 Cutter/Bottle stage • Remove packing and rinse thoroughly, drying • Wipe off rubber cover with dust WARNING Do not spray water directly on the rubber cover of the bottle, and do not put it on it...
-
Page 9: Troubleshooting
Trouble shooting Vibration is large The cutter rotates slowly or does not turn. Operation stopped. • How to cut materials is too big >>>Cut materials small • Too much materials>>>Reduce the amount of material • Ice is crammed in>>>Remove pinched ice •... - Page 10 Trouble shooting Can not turn on. • Safety switch not pushed >>>Assemble correctly • Motor protection device is still working >>>Press the reset button • The power plug is disconnected>>>Plug the power plug into an outlet Smoke is generated. The cord twisted and came back. •...
- Page 11 Index 1. Shipped components 2. Installation 2.1 Assembly/Disassembly 2.2 Storage 3. Operation 3.1 How to use the mixer 4. Maintenance 4.1 Mixer bottle/Packing 4.2 Cutter/Bottle stage 4.3 Body 5. Trouble shooting...
Need help?
Do you have a question about the TM845 and is the answer not in the manual?
Questions and answers