Table of Contents
Advertisement
Linksys E2100L
<Type> Log
The Incoming Log displays a temporary
•
log of the source IP addresses and destination
port numbers for the incoming Internet traffic . The
Outgoing Log displays a temporary log of the local
IP addresses, destination URLs/IP addresses, and
service/port numbers for the outgoing Internet traffic .
The Security log displays the login information for the
browser-based utility . The DHCP Client Log displays
the LAN DHCP server status information .
Click Save the Log to save this information to a file on
your computer's hard drive . Click Refresh to update
the log . Click Clear to clear all the information that is
displayed .
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network devices, including
connection to the Internet .
Administration > Diagnostics
Diagnostics
Ping Test
Ping checks the status of a connection .
IP or URL Address
Enter the address of the computer,
device, or website whose connection you wish to test .
Packet Size
Enter the packet size you want to use . The
default is 32 bytes .
Number to Ping
Enter the number of times you wish to
test the connection . The default is 5 .
Start Test
To run the test, click this option . The Ping
screen shows if the test is successful . Click Close to return
to the Diagnostics screen . Click Stop to stop the test .
Advanced Wireless-N Router
Chapter 3: Advanced Configuration
Diagnostics > Ping
Traceroute Test
Traceroute checks the performance of a connection .
IP or URL Address
Enter the address of the computer,
device, or website whose connection you wish to test .
Start Test
To run the test, click this option . The Traceroute
screen shows if the test is successful . Click Close to return
to the Diagnostics screen . Click Stop to stop the test .
Diagnostics > Traceroute
38
- Quick Links:
- Router Settings
Hide quick links:
Advertisement
Table of Contents
