Table of Contents
Advertisement
Chapter 3
the default, 802.1D, or select 802.1Q, which is used by
some IPTV streams.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Administration > Management
Use this screen to manage specific Bridge functions: access
to the web-based utility, backup of the configuration file,
and reboot.
Administration > Management
Management
Bridge Access
Use a password to protect access to the web-based
utility.
Bridge Password
Enter a new Password for the Bridge.
Re-enter to confirm
Enter the Password again to confirm.
Idle Timeout
The login times out after a period of
inactivity that you specify. The range is 60 to 3600 seconds.
The default is 600.
Web Access
Access via Wireless
If you are using the Bridge in a public
domain where you are giving wireless access to your guests,
you can disable wireless access to the Bridge's web-based
utility. You will only be able to access the web-based utility
via a wired connection if you disable the setting. Keep the
default, Enabled, to allow wireless access to the Bridge's
web-based utility, or select Disabled to block wireless
access to the utility.
Backup and Restore
Backup
To back up the Bridge's configuration file, click
Backup Configurations. Then follow the on-screen
instructions.
Restore
Click Browse and select the configuration file.
Then click Restore Configurations.
Wireless-N Ethernet Bridge with Dual-Band
Advanced Configuration
System Reboot
Reboot
To reboot or restart the Bridge, click Start to
Reboot.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Administration > Factory Defaults
Use this screen to restore the Bridge's configuration to its
factory default settings.
Factory Defaults
Restore All Settings
To reset the Bridge's settings to the
factory defaults, click Restore All Settings. Any settings
you have saved will be lost when the default settings are
restored.
Administration > Factory Defaults
Administration > Upgrade Firmware
Use this screen to upgrade the Bridge's firmware. Do
not upgrade the firmware unless you are experiencing
problems with the Bridge or the new firmware has a
feature you want to use.
Administration > Upgrade Firmware
Before upgrading the firmware, download the Bridge's
firmware upgrade file from the Linksys website,
www.linksysbycisco.com.
Upgrade Firmware
Please select a file to upgrade the firmware
Browse and select the firmware upgrade file. Then click
Start to Upgrade and follow the on-screen instructions.
Click
10
Hide quick links:
Advertisement
Table of Contents
