Vertiv HMX1080T User Manual page 40

No. Item
1 Reset
2 Power indicator
3 Link indicator
4 Select button
5 Mode button
6 Mic. input jack
7 Audio output jack
8 Power jack
9 LAN port 1
10 LAN port 2
11 Audio input jack
12 Mic. output jack
13 IR output jack
14 USB Type-B connector
15 HID connector
16 RS-232 connector
17 DVI input connector 1
18 DVI output connector 1
19 USB indicator
20 USB Type-A connector
21 USB Type-A connector
22 IR input jack
23 RS-232 connector
24 DVI input connector 2
25 DVI output connector 2
Both LAN ports can be connected to the transmitter, receiver, Gigabit Ethernet Hub/Switch or a device can be
supported to connect to the Local Area Network using an RJ45 connector. Beware the connection may invalid if
connecting both LAN ports into a same hub/switch.
Table 5-2 Description 2
Reset the unit.
Lights when power is on.
Lights when the connection between transmitter and receiver is active.
Press to connect or disconnect between the transmitter and receiver.
Press to select Graphic mode or Video mode.
Connect to a microphone.
Connect to a speaker.
Connect to the power adapter.
Connect to the LAN port of Tx, Rx or a Gigabit Ethernet Hub/Switch*.
Connect to the LAN port of Tx, Rx or a Gigabit Ethernet Hub/Switch*.
Connect to the audio output jack of PC.
Connect to the mic. input jack of PC.
Connect to the IR emitter.
Connect to the host PC.
Reserved.
Connect to the RS-232 port of PC.
Connect to the DVI output of PC.
Connect to a DVI monitor.
Lights when a USB peripheral is connected.
Connect to a USB keyboard and mouse.
Connect to USB peripherals.
Connect to the IR receiver.
Connect to a RS-232 device.
Connect to the DVI output of PC.
Connect to a DVI monitor.
35
Description
HMX1080/HMX2080 User Manual
HMX TX&RX