Installation Instructions - commercial cool CCF45P10 User Manual

ENGLISH
SET UP & USE

INSTALLATION INSTRUCTIONS

SAFETY PRECAUTIONS:
1. Turn off power at main electrical service box before starting installation.
2. Electrical connections must comply with local code ordinances, national
electrical codes, CEC, NEC and ANSI/NFPA 70.
3. Make sure the installation site you choose allows the fan blades to rotate freely
without any obstructions.
4. When mounting the fan on a ceiling outlet box, use an approved (CSA for
Canada and UL for U.S.) ceiling fan box marked "FOR FAN SUPPORT". Ensure
the outlet box is securely installed in place and that it is able to support at least
the fan weight.
WARNING: To reduce the risk of fire, electric shock, or other personal injury,
5.
mount fan only on an outlet box or supporting system marked acceptable for
fan support of 35 lbs (15.9 kgs) or more and use the mounting screws provided
with the outlet box. Most outlet boxes commonly used for the support of lighting
fixtures are not acceptable and may need to be replaced. Consult a qualified
electrician if in doubt.
6. Total Fan Weight For Reference: 30" Fan is approximately 11.02 lbs;
36" Fan is approximately 13.23 lbs, 42" Fan is approximately 16.53 lbs;
48" Fan is approximately 17.63 lbs, and 52" Fan is approximately 19.84 lbs.
WARNING:
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
•
PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED ACCEPTABLE FOR
FAN SUPPORT AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET
BOX.
• Mount with the lowest moving parts at least 7 Feet (2.10 Meters) above floor or
grade level.
DO NOT operate reversing switch while fan blades are in motion. Fan must be
•
turned off and rotating blades stopped. When fan blades have stopped, reverse
and speed chain may be pulled to start operation again.
Page 6