Advertisement
Installation Overview
In order to have the safest, fun and longest use of your Pro Dunk® system,
please note and heed the following:
1) Prior to goal assembly, ensure the structure the system is being
mounted to is structurally sound and capable of supporting the
system. We recommend contacting an engineer to evaluate to
structure as well.
2) Installation requires full access to the rear side of the structure.
3) Immediately unpack all components and cross check against bill
of materials. Report any shortages to Hoops Inc. customer ser-
vice at 1.888.600.8545.
4) Parts can be ordered at
5) For safety measures, have at least 4 capable persons to assist
you in assembly of your system.
www.produnk.com/video/wall_king_installation.php
Power Drill (Hammer drill for brick and stone)
2 Adjustable Wenches
#2 Phillips Screw Driver
2 8ft Ladders
Level
Pencil
Tape Measure
www.produnk.com/parts
Wall King Installation Video
Required Tools
Socket/Wrench Sizes
Recommended
24mm
22mm
17mm
4
Advertisement
