IKOHS Chef BOT COMPACT Manual page 13

Using the slicer disc
Connecting the robot
1. Plug your powercord into the main base and a power outlet. Switch on the unit.
2. The touch panel will flash, push the rotary knob to enter into standby mode.
3. Select your needed function as required.
1. Attach the disc axis in the driving shaft.
2. Place the disc on the upper part of the axis.
• The disc is reversible. One side is used for slicing and the other for grating.
3. Hold the disc by the two holes using your thumb and index or middle finger. Be
careful because the edges are very sharp.
4. Close the jug using the food processor lid.
5. Turn it clockwise to lock it before start using it.
13
EN