Advertisement
Advertisement
Table of Contents
Summary of Contents for DG DISPLAYS2GO
- Page 1 SKU: DIGCOM32 igital igital rame rame - 32” - 32” asel asel...
- Page 2 Letter represents the hardware. Number is equal to the quantity of each part. NOTE: Assembly will require Phillips head screwdriver.
- Page 3 1. Install the body of the easel and connect the horizonal 2. Check the front and back side of the body of the easel and vertical rods with screws. to ensure that it is properly installed. Compare against the image above. 3.
- Page 4 5. Connect the vertical bar to the tray and install the 6. Assemble the tray and the body of the easel. Height of latch, as shown. easel can be adjusted by sliding the latch. Scan QR code to visit product page. 7.
- Page 5 How to Adjust Height and Tilt Angle of Easel Adjust tilt angle by sliding the screws. Adjust height of easel by sliding the latch. If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer service at 844-221-3388.
Need help?
Do you have a question about the DISPLAYS2GO and is the answer not in the manual?
Questions and answers