Subscribe to Our Youtube Channel
Summary of Contents for Rexing SDB1
- Page 1 SDB1 Smart Video Doorbell User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.com...
- Page 2 (877) 740-8004 Our Support team will respond to you as soon as possible. Always a surprise in Rexing. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.
-
Page 3: Package Contents
Package Contents SDB1 Smart Video Doorbell User Manual Safety Guide 安全ガイド The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.com www.rexingusa.com Rexing SDB1 Doorbell Micro USB Cable Safety Guide Wireless Chime Anchor Packs... -
Page 4: Product Overview
Product Overview Microphone Motion Sensor Micro USB Port Wide-angle Lens (Battery Charging) Indicator Flashing BLUE Doorbell rings Flashing The device is reconnecting to Infrared Light the Wi-Fi network. Flashing BLUE alternately Doorbell Button Low battery. Please recharge your batteries. Speaker Volume Down Tune Volume Up... -
Page 5: Get Started
Get Started Step 1. Charge Batteries Remove the battery cover. Please remember to remove the protector next to the batteries. R E M O V E B E F O U S E... - Page 6 Fully charge the batteries by connecting your device to a wall charger (not included) by using the included Micro USB cable. It takes about 14 hours for the batteries to be fully charged. WARNING If your device captures an excessive number of events daily, then you may need to recharge your battery more frequently.
- Page 7 Step 2. Download the Rexing Home App Download and install the app. Scan the QR code below or Rexing Home search for Rexing Home in the App Store or Google Play. Create an account. You may now access the basic info of the app and view the battery level on your phone by pressing the Setting icon.
-
Page 8: Step 3. Set Up Your Device
Step 3. Set up your device To pair your device, follow the steps below and the in-app instructions. Open the Rexing Home app and log in to your account To add your SDB1 smart doorbell, Select Video Doorbell. select the + icon... - Page 9 Press and hold the Doorbell button for about 8 seconds until the indicator flashes red, tap Next, then tap Yes. Select your 2.4GHz Wi-Fi network and enter the Wi-Fi password, then tap Next (5GHz is not supported). 10:25 Device Scan Device name Doorbell Living room...
- Page 10 Use your doorbell to scan the QR Code shown on the app, then select Confirm once the Wi-Fi setup has finished. �" Distance 10:25 Add Via Scanning Doorbell Signup successful Confirm Scan the QR code with the device’s camera. The distance between phone and should be about 4 inches (10 cm).
- Page 11 Install Your Smart Doorbell Step 1 Mark on the wall where the holes should be and then use a bit drill to drill holes into your wall where it's marked. Insert the anchors and secure your doorbell with the mounting and security screws provided.
- Page 12 The chime can be plugged into any wall outlet in the home. Note: The video doorbell is only compatible with the Rexing wireless chime. Before getting started, be sure that the doorbell is connected to your phone and the chime is plugged in.
- Page 13 Press the Connect button. Press the Doorbell button to pair your doorbell to the chime. Press the Tune button to cycle Press the Doorbell button again to through 38 different tunes and confirm your selection. select a tune.
-
Page 14: Specifications
Specifications T31ZL Internal Memory 64Mb flash Motion Sensor 1080p GC2053 CMOS Field of View 120° ≥39dB Signal-to-noise Ratio Aperture 0.8Lux/F1.4 (Color Mode), 0.3Lux/F1.4 (Black and White Mode) 1080p Video Resolution 850nmΦ28Mil Night Vision Up to 20 Meters Night Vision Field of View 6.5 ~ 13 Feet Motion Sensing Distance MP4 (H.264) - Page 15 Working Voltage 3.7V Working Current 260mA in use, 1.7mA in the sleep mode USB Charging Voltage DC 5V / 1.5A Storage Temperature 32°F〜122°F Operating Temperature -50〜158°F...
-
Page 16: Troubleshooting And Faq
Wi-Fi setup. How to share the device with my family? Open the Rexing Home app. From the home page, tap the Share icon. Tap Share via Email or Share via QR Code. You can share the device with up to 8 users. - Page 17 Share via Email: The new user needs to download the Rexing Home app and create an account with the same email address which the device owner has shared with. Log in to the account and you'll see the shared device.
- Page 18 How to adjust Motion Detection Sensitivity? From the home page, tap the Motion Detection icon. 10:25 Motion Settings Save Motion Turn on humanoid detection High Medium Zone Records and notifies you about every motion. Shortest battery life. Motion Detection Sensitivity High: Records and notifies you about every motion.
- Page 19 How to enable notifications on my phone? To do this, you need to give permission for the Rexing Home app to access to your microphone and enable notifications. Follow these steps to enable notifications. Open Settings. Go to Notifications. Make sure all switches are ON for Rexing Home.
-
Page 20: Warranty And Support
Warranty & Support Warranty The Rexing SDB1 Smart Video Doorbell comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at... - Page 21 FCC ID: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the SDB1 and is the answer not in the manual?
Questions and answers