Summary of Contents for fann 686CS
- Page 1 Constant Speed Mixer, Model 686CS Instruction Manual Manual No. D00312132, Revision G Instrument No. 101656308 © 2016 Fann Instrument Company...
- Page 2 Printed in USA. The information contained in this document includes concepts, methods, and apparatus which may be covered by U.S. Patents. Fann Instrument Company reserves the right to make improvements in design, construction, and appearance of our products without prior notice.
-
Page 3: Table Of Contents
Model 686CS Instruction Manual Table of Contents Introduction ....................... 6 1.1 Document Conventions ..................7 Safety ........................8 Features and Specifications ..................9 3.1 Mechanical Features ..................10 3.2 Control Features ..................... 10 Installation ......................12 Operation ........................ 13 5.1 Key Functions ....................14 5.2 Basic Operating Instructions ................ - Page 4 Model 686CS Instruction Manual List of Figures Figure 3-1 Constant Speed Mixer, Model 686CS ............9 Figure 3-2 Model 686CS Control Panel ................. 11 Figure 5-1 Blade Assembly ................... 13 Figure 5-2 Remote Control .................... 18 D00312132 Revision F, October 2015...
- Page 5 List of Tables Table 3-1 Constant Speed Mixer, Model 686CS Specifications ........9 Table 8-1 Optional Accessories for the Model 686CS Mixer .......... 22 Table 9-1 Parts List for the Model 686CS Mixer ............23 Table 9-2 Waring Blade Assembly Model 686CS Mixer ..........23...
-
Page 6: Introduction
Model 686CS Instruction Manual Introduction The Fann Constant Speed Mixer, Model 686CS is designed to mix cements to comply with American Petroleum Institute (API) specifications and recommended practices. As deeper wells are being drilled, heavier weight cements are needed to withstand higher downhole pressures. -
Page 7: Document Conventions
Model 686CS Instruction Manual Document Conventions The following icons are used as necessary in this instruction manual. NOTE. Notes emphasize additional information that may be useful to the reader. CAUTION. Describes a situation or practice that requires operator awareness or action in order to avoid undesirable consequences. -
Page 8: Safety
These foreign objects could strike the operator or damage the mixing blades and container. 3. The Model 686CS should be plugged in to a properly grounded outlet with the ground prong in place. 4. Do not use extension cords. -
Page 9: Features And Specifications
Waring. It is specially designed to comply with API standards and to allow automatic programming of some mixing procedures. The mixer comes with a remote control for optional use. Table 3-1 Constant Speed Mixer, Model 686CS Specifications Category Specification Speed Range... -
Page 10: Mechanical Features
Adapters are not required. Control Features The Model 686CS Mixer has a liquid crystal display (LCD) screen that shows the operating messages on a sharp, blue backlight, making it easy to read. The mixer has programming features that can be set up using these buttons: •... -
Page 11: Figure 3-2 Model 686Cs Control Panel
Model 686CS Instruction Manual Profile Buttons Set Button API Button Figure 3-2 Model 686CS Control Panel D00312132 Revision F, October 2015... -
Page 12: Installation
Model 686CS Instruction Manual Installation The mixer should be placed on a countertop at a suitable height for the operator to add ingredients. The operator should be able to easily reach the control panel and view the display. This mixer requires 120 VAC, 50-60 Hz. If the power source is 240 VAC, a step down transformer (Part Number 101553700) must be used and ordered separately. -
Page 13: Operation
Model 686CS Instruction Manual Operation Always install the mixing blades so that the blade tips curve outward and the beveled edges are down. See Figure 5-1 below, and refer to Table 9-2 for a list of part numbers and descriptions. -
Page 14: Key Functions
Model 686CS Instruction Manual Key Functions Do NOT operate this mixer empty or without the container or mixing cup. Power On/Off Button — Press this button to turn the mixer on and off. When the unit is turned on, the blue LCD backlight will illuminate and the machine is ready for operating. -
Page 15: Basic Operating Instructions
1. Plug the power cord into an AC outlet. Press the ON/OFF button to turn the unit ON. The blue LCD backlight will turn on and the words, FANN Instrument Model 686CS will appear, indicating that the power is ON. After a few seconds, the machine enters the operational mode. -
Page 16: Profile Programming Instructions
Model 686CS Instruction Manual Profile Programming Instructions There are two programmable profiles for easy operation and consistent results. Each profile can be programmed with five different speeds, running times, and acceleration. For example, the Profile 1 (P1) can be set as follows:... - Page 17 Model 686CS Instruction Manual To program a profile, follow these instructions: 1. Press SET. 2. Select P1 or P2 depending on which profile needs to be programmed or press SET to exit. 3. In profile editing mode, the top right corner of the display will show the step number –...
-
Page 18: Preprogrammed Profile
Model 686CS Instruction Manual Preprogrammed Profile To run any of the preprogrammed profiles, press a desired profile button to start the machine. The motor will run at the preset speed within the preset mixing time. The LCD will show the time remaining. Once the mixer counts down to zero (0), the machine will proceed to the next step. -
Page 19: Basic Mixing Instructions
Model 686CS Instruction Manual Basic Mixing Instructions The blender should not be operated without any contents in the mixing cup. Always install the mixing blades so that the blade tips curve upward and the beveled edges are visible. See Figure 5-1. -
Page 20: Test Analysis
Model 686CS Instruction Manual Test Analysis The Constant Speed Mixer produces no results to be analyzed. This mixer complies with API Spec 10A, Cements and Materials for Well Cementing and API RP 10B-2, Recommended Practice for Testing Well Cements. D00312132... -
Page 21: Troubleshooting And Maintenance
• The motor and controller do not have any user-repairable items. If the motor fails to start or does not maintain speed properly, return the blender to Fann for repair. • If the display or programming buttons stop working properly, return the unit to Fann for repair. -
Page 22: Accessories
Model 686CS Instruction Manual Accessories Table 8-1 Optional Accessories for the Model 686CS Mixer Part Number Description 101553700 Transformer, Step Up/Down, 120 V TO 240 V, 3000 W 101948589 Stainless Steel container, 64 oz (1.9 L) 101998395 Blending Assembly for 64 oz (1.9 L) container 102001793 Blender Blade for 64 oz (1.9 L) container... -
Page 23: Parts List
Model 686CS Instruction Manual Parts List Table 9-1 Parts List for the Model 686CS Mixer Part Number Description 101948588 Stainless Steel container, 32 oz (946 mL) Blending Assembly for 32 oz (946 mL) container 101957727 (includes blender blade) 102001777 Blender Blade for 32 oz (946 mL) container... -
Page 24: Warranty And Returns
Fann or, at Fann's option, to the allowance to Customer of credit for the cost of such items. In no event shall Fann be liable for special, incidental, indirect, consequential or punitive damages.