FasTest CoreMax SCFTP0620 Installation And Operating Instruction

HEAD INSTALLATION AND OPERATING INSTRUCTION
FasTest, Inc. Product Warranty
FasTest, Inc. warrants its products against defects of workmanship and/or material for 12 months from the date of the
sale by FasTest, Inc. This warranty is void if the product is misused, tampered with or used in a manner that is not in
accordance with FasTest, Inc. recommendations and/or instructions. FasTest, Inc. is not liable for consequential or
other damages including, but not limited to, loss, damage, personal injury, or any other expense directly or indirectly
arising from the use of or inability to use its products either separately or in combination with other products. ALL
OTHER WARRANTIES EXPRESSED OR IMPLIED, WHETHER ORAL OR WRITTEN, INCLUDING BUT NOT
LIMITED TO
WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
EXCLUDED.
Remedy under this warranty is limited to replacement of the product or an account credit in the amount of the original
selling price, at the option on FasTest, Inc. All allegedly defective products must be returned prepaid transportation to
FasTest, Inc. along with information describing the products performance, unless disposition in the field is authorized
in writing by FasTest, Inc.
SCFTP0620 CoreMax Installation Torque
Tool.
Description: The CoreMax Installation Torque Tool
Installs the CoreMax Valve Into a CoreMax Seat,
Torqueing the Valve to 8 ft/lbs. at 200 RPM's
(Maximum).
SCFTP020 CoreMax Installation Torquing Tool
Please thoroughly read the instructions prior to operating the SCFTP0620
CoreMax torque tool. If you do not understand instructions, or if components
are missing, call FasTest before using connector.
The Torque Tool is designed to mate with a specific application

Roseville, MN
Ph: 1-800-444-2373
Fax: 651-645-7390
www.fastestinc.com
WP171 Rev A 03/28/2019