Subscribe to Our Youtube Channel
Related Manuals for Bestgreen LM-C3210
Summary of Contents for Bestgreen LM-C3210
- Page 1 Original instructions ELECTRICAL LAWN MOWER LM-C3210 WARNING: Read thoroughly the instruction handbook before using this machine.
-
Page 2: Description Of The Symbols
DESCRIPTION OF THE SYMBOLS Symbols are used in this manual to attract your attention to possible risks. The safety symbols and the explications which accompany them must be perfectly understood. The warning themselves do not prevent the risks and can not be a substitute for proper methods of avoiding accidents. - Page 3 earth connection. Degree of protection against water: IPX4. These symbols indicates the requirement of wearing eye protection, ear protection and gloves when using the product. Wear safety boots. Disconnect the mains plug if the cord becomes damaged or entangled. Do not expose to rain. Danger of injury from flying parts! Always maintain a sufficiently safe distance.
- Page 4 Beware of sharp blades. Blades continue to rotate after the motor is switched off - Remove plug from mains before maintenance or if cord is damaged. Keep the supply flexible cord away from the cutting blades. The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste.
- Page 5 READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Children should be supervised to ensure that they do not play with the appliance.
- Page 6 open sandals. Avoid wearing clothing that is loose fitting or that has hanging cords or ties. b. Thoroughly inspect the area where the machine is to be used and remove all objects which can be thrown by the machine. c. Before using, always visually inspect to see that the blade, blade bolt and the blade assembly are not worn or damaged.
- Page 7 transportation when crossing surfaces other than grass, and when transporting the machine to and from the area to be used. j. Never operate the machine with defective guards or shields, or without safety devices, for example deflectors and/or grass collector, in place. k.
- Page 8 Before checking, cleaning or working on the machine, After striking a foreign object. Inspect the machine for damage and make repairs before restarting and operating the machine. If the machine starts to vibrate abnormally (check immediately) Inspect for damage, ...
-
Page 9: Intended Use
50 hours and that are primarily used for tending grass or lawn areas, but not in public facilities, parks or sports grounds and not for agricultural or forestry use. TECHNICAL SPECIFICATIONS Model LM-C3210 Voltage/Frequency 230 - 240V~, 50Hz Rated power 1200W... - Page 10 Wear ear protection! Vibration total values (triax vector sum) determined according to EN 60335-2-77:2010. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60335-2-77:2010 and may be used to compare one tool with another.
- Page 11 7 Cable clip 8 Safety guard 9 Grip 10 Grass catcher 11 Top handle 12 Knob module 13 Cutting height adjusting lever 14 Wheel 15 Deck Delivered items Carefully remove the machine from its packaging and check that you have all the following items: description quantity No.
- Page 12 Abb.A-1 Abb.A-2 2. The switch box is properly assembled only when the clips (Abb.B-1) are aligned with switch box (Abb.B-2) and indication lines are aligned (Abb.B-3), in order to lock the switch box on handle. Clips Abb.B-1 Abb.B-2 Abb.B-3 3. After fixing, try to move the switch box in reverse direction to check if the switch box is properly assembled.
- Page 13 Abb.C-3 Abb.C-4 ① Insert the lower handle 1 into the Bolts provided in the deck, secure with the Knob module and washer. (Abb.C-1) ② Loosen the screw on the cable hook, and attach the cable hook to the upper handle. (Abb.C-2) ③...
- Page 14 Abb.D-3 2. Assemble the grip onto the upper cover of the catcher（Abb.D-3） Abb.D-4 Abb.D-5 Abb.D-6 3. Slide the grass box tongue into the slots in the grass box lower until it clicks securely into position. (Abb.D-4) 4. Fitting fully assembled grass box to lawn mower. (Abb.D-6) a.
-
Page 15: Operation
Height of cut is adjusted by changing the position of adjusting lever. To raise the blade height, grasp the height adjustment lever and move it toward the back of mower. To lower the blade height, grasp the height adjustment lever and move it toward the front of mower. Abb.E NOTE: A medium height of cut is recommended for most lawns. - Page 16 Make sure the blade stop rotating before switching “on” again. Abb. G Starting: ① Press and hold the safety button 2. Squeeze the switch lever 1 towards the handle. (Abb.G) ② Release the safety button 2. Stopping: Release the switch lever 1. Mowing For cutting convenience, it may be better to start mowing at a point close to the power supply and to work your way away from the supply.
- Page 17 continuing to mow, at this time, do not operate the switch lever 1 as this will prolong the reset time of the safety cut-out. If the mower cuts out again, increase the height of cut to reduce the load on the motor. Select the cutting height which will suit your desired grass height.
- Page 18 Never use the machine without rear flap or grass box connected. (Abb.4A) Do not attempt to lift up the rear part of the machine, instead, to hold up the front part of machine to get the machine re-start when it fails to rotate owing to too strong grass. (Abb.4B) On slopes, always mow sideways, never up and down.
-
Page 19: Maintenance
Never put your hands or feet near or under rotating parts. Always keep away from the discharge opening, if possible. (Abb.4D) MAINTENANCE Warning: Stop the mower and remove the plug from the power supply before remove the grass box. Before performing any maintenance or cleaning work, Always pull out the mains plug! Note: To ensure long and reliable service, carry out the following maintenance regularly. -
Page 20: Troubleshooting
Turn the machine on its side and clean the blade area. If grass cuttings are compacted in the blade area, remove with a wooden or plastic implement. To protect from rust, wipe over all metal parts with an oily cloth or spray with light lubricant. Store with the extension cord in a locked, dry location where is out of the reach of children to prevent unauthorized use or damage. -
Page 21: Eu Declaration Of Conformity
SAS EQUIPEMENT DE LA MAISON· 24 rue Auguste Chabrières 75015 PARIS This declaration of conformity is issued under the sole responsibility of the manufacturer. Object of the declaration Electrical lawn mower Model: LM-C3210 / BG SERIE E1 Rated voltage: 230-240V~, 50Hz Power: 1200W Brand: BESTGREEN...
Need help?
Do you have a question about the LM-C3210 and is the answer not in the manual?
Questions and answers