Subscribe to Our Youtube Channel
Summary of Contents for Wuhan Guide MISCOM7212G Series
- Page 1 MISCOM7212G Series Industrial Ethernet Switch User Manual Edition: V3.0) Wuhan Maiwe Communication Co., Ltd.
- Page 2 Copyright Copyright © Wuhan Maiwe Communication Co., Ltd. Clarification The user manual is applicable to MISCOM7212G Series Industrial Ethernet Switch. Please read the following license agreement carefully before using this manual. The products described in this manual can be used only if you agree on the following license agreement.
- Page 3 MISCOM7212G Series Industrial Ethernet Switch Safe Use Instruction This product performance is excellent and reliable in the designed range of use, but it’s necessary to avoid man-made damage or destroy for the equipment. Read the manual carefully and keep this manual for reference if need afterwards.
-
Page 4: Table Of Contents
MISCOM7212G Series Industrial Ethernet Switch Catalogue 1. Introduction..............- 1 - 1.1. Product introduction..............- 1 - 1.2. Product characteristic..............- 1 - 1.2.1. Industrial switch with high performance.......... - 1 - 1.2.2. Industrial level power design............- 1 - 1.2.3. -
Page 5: Introduction
MISCOM7212G Series Industrial Ethernet Switch 1. Introduction 1.1. Product introduction The MISCOM7212G series industrial gigabit Ethernet switch is developed for the fast industry Ethernet communications .It makes industrial communication more fluent, more stable, more fast. All the TX ports support auto-negotiation, 10/100/1000Mbps full duplex and half duplex, Auto-MDI/MDI-X Functions. -
Page 6: Solid Hardware Design
MISCOM7212G Series Industrial Ethernet Switch DC power: 18~48VDC AC/DC power: 220AC/DC(85~264VAC/110~370VDC) 1.2.3. Solid hardware design Aluminum shell cool design with no fan,make the switch work in -40~+70℃ Strong shell structure,IP40 protection level 1.3. Packaging l Item The switch CD(software) CONSOLE cable Warrant card 1.4. - Page 7 MISCOM7212G Series Industrial Ethernet Switch 156mmx72mmx120mm Installing:35mm DIN mounting Cool method: Aluminum shell cool design with no fan Protection level:IP40 Weight: kg Working temperature:-40°C~+70°C Working environment Storage:-40°C~+85°C Relative Humidity :0~95% (non-condensing) EMC standard: EN61000-4-2(ESD):±8kV/±15kV EN61000-4-3:10V/m(80-1000MHz) EN61000-4-6:3V(10kHz~150 kHz)，10V(150kHz~80 MHz) EN55022:EN55022 Class A...
-
Page 8: Hardware Installation And Network
MISCOM7212G Series Industrial Ethernet Switch 2. Hardware installation and network 2.1. Hardware structure 2.1.1. System structure System hardware include following: Industrial Ethernet control adapt high performance ASIC chip technology, support data layer 2 wire speed transmit Power supply adapt reliable protection for EMC and against over-current/over-voltage The fiber port uses the LC module... - Page 9 MISCOM7212G Series Industrial Ethernet Switch LED indication lights indication ALAM G9 - G12 lights P1 P2 GREEN GREEN GREEN GREEN RED on GREEN blink blink blink Power System Fiber link Data No alarm Alarm is active transmitting LED indication lights for ports...
- Page 10 MISCOM7212G Series Industrial Ethernet Switch definition Power 1 input V1+:(AC-L)/+(DC) Power 1 input V1-:(AC-N)/-(DC) GND9(Grounding) Power 2 input V2+: +(DC) Power 2 input V2- :+(DC) Alarm relay Power down alarm relay switches. This relay is normally closed relay, when the switch operates normally, the relay is energized to open when the system is powered down, the relay power-down closure.
-
Page 11: Hardware Installation
MISCOM7212G Series Industrial Ethernet Switch 3-wire RS-232. Serial communication parameters are as follows: Baud Rate: 115200bps, Data bits: 8 ,Parity: none, stop bit: 1 Flow Control: none 2.2. Hardware Installation 2.2.1. Installation notice The Industrial Ethernet switch is used standard 35mm DIN-Rail install.Please make sure a suitable work environment, including power... -
Page 12: Installation
MISCOM7212G Series Industrial Ethernet Switch 2.2.2. Installation This series equipment back panel have fixed well DIN rail-way connection seat. If need installation, please check DIN rail way condition . 2.2.3. Cable connection After install Ethernet switch , please correct install cable. The switch 10/100/1000Base-TX RJ45 interface ports, use the crossover cable direct connect with terminal equipment , use cross wire connect network equipment . -
Page 13: Cable Layout
MISCOM7212G Series Industrial Ethernet Switch 1.SFP during the observation of a finger end of the PCB. 2.the finger end into the SFP metal shielding cage, hear a click sound indicates that the device has been inserted in place, then the SFP plug handle, into the interface parallel to the normal position, you can use. -
Page 14: Rj45 Port Testing
MISCOM7212G Series Industrial Ethernet Switch 2.3.2. RJ45 port testing As picture show, the power port by any two straight lines and two test networked computers connected to the network port, send a Ping command to each other, both sides were able to correctly Ping to each other without loss. -
Page 15: Network Topology
MISCOM7212G Series Industrial Ethernet Switch 2.4. Network topology 2.4.1. Atar network 2.4.2. Chain network 2.4.3. Single ring network - 11 -... -
Page 16: Two Group Ring Network
MISCOM7212G Series Industrial Ethernet Switch 2.4.4. Two group Ring network 2.4.5. Two group dual ring network - 12 -... -
Page 17: Maintenance And Service
MISCOM7212G Series Industrial Ethernet Switch 3. maintenance and service Since the date of product shipment, it provide five years of product warranty.In the warranty period, if there is any failure or functional product fails, it will repair or replace free of charge for users of the product.However, these commitments do not cover improper use, accidents, natural disasters, improper operation or improper installation caused the damage. - Page 18 WUHAN MAIWE COMMUNICATION CO.,LTD Add.:Building 2, Area E, Phase ii, Optical valley core center, No.52, Liufang road, East Lake Hi-tech Development Zone,Wuhan,China Phone: 027-87170215/16 Fax: +86-027-87170217 www.maiwe.com...
Need help?
Do you have a question about the MISCOM7212G Series and is the answer not in the manual?
Questions and answers