Advertisement
3.2.
Fitting to the ceiling.
3.2.1. Ensure the ceiling to which the Air Hose is to be fixed is of sound
construction, and that the securing point will hold the working strain of the
hose when in use.
3.2.2. Fix Pin and Base Plate (fig 2. E) to ceiling by means of four anchor screws.
3.2.3. Mount the two halves of the Rotating Support (F), over Support Bracket (B),
and the Base Plate Pin.
3.2.4. Secure the two halves of the Rotating Support with the four screw provided.
3.2.5. Before use, check all fixtures and support to ensure they are safe, and
secure, and that the hose will extend, and retract with ease.
4.
HOSE CLAMPING SYSTEM
WARNING! Ensure the air supply is disconnected.
4.1.
Locate the hose clamp Lever on the side of the main housing (fig 3. B).
p
4.2.
To clamp the hose whilst in an extended position, place the clamp lever in position (1),
locate the hose ball grip and pull the hose outward. An intermittent fast clicking noise
will be discerned as the hose passes through the clamping mechanism.
When you stop pulling the hose it will remain clamped at that length.
4.3.
To extend the hose further, take the ball grip and continue to pull accordingly.
4.4.
To release and allow the hose to automatically rewind, extend the hose a little further,
and release during the intermittent stage between the fast clicking noise.
Practice a few times, so that you will be familiar with the feel of the hose,
thus eliminating any reliance upon sounds.
4.5.
To release the cable so that it will remain in constant traction, pull the clamp lever
outward and turn 90
0
5.
MAINTENANCE & STORAGE
WARNING! Before attempting maintenance or inspection, release any pressure remaining in the hose.
To ensure maximum performance, clean the hose and main housing regularly. DO NOT spray or wet the product, but clean with a cloth and
p
warm water. DO NOT use solvents or detergents, as these may permanently damage the item. This product does not require special
maintenance as it is lubricated with permanent grease. If the product needs to be opened, consult your nearest authorised service agent.
WARNING: DO NOT attempt to undo, or remove any casing screws yourself.
Replacement of the supply hose should be carried out by skilled personnel only, consult your nearest authorised service agent.
STORAGE:
Should you wish to store the air hose away, ensure it is clean, and dry. Place the item in a dark, safe, dry, child proof location, where the
temperature will remains reasonably stable. DO NOT store in nylon, or plastic bag as this will encourage condensation.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
01284 757500
, (see fig 3 position 2.).
01284 703534
fig 2
Sealey Group,
Bury St. Edmunds,
Suffolk.
E-mail: sales@sealey.co.uk
fig 3
Advertisement
