Suzanne Somers SK TRIPLE GOURD LAMP Manual

Advertisement

SUZANNE KASLER
BALLARD DESIGNS
PRODUCT NAME: SK Triple Gourd Lamp
ITEM NUMBER: LA186
DIMENSIONS OF ITEM ASSEMBLED: 28 1/2"H x 18" DIA

IMPORTANT SAFETY INSTRUCTIONS:

-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-These Assembly Instructions are provided for your safety. It is important that they are read carefully
and completely before assembling this Lamp.
-This product must be installed with the applicable installation code by a person familiar with the
construction and operation of the product.
-This Lamp has been rated for up to an 150 Watt MAX Type A Bulb (NOT Included) or 30 Watt
CFL Bulb (NOT Included).
WARNING:
-Deviation from these Assembly Instructions may result in a risk of fire or electric shock.
-To reduce risk of fire, electrical shock, or personal injury, always turn off and unplug Lamp and
allow it to cool prior to replacing the bulb.
-Do not touch the bulb when the Lamp is turned on. Do not look directly at the lit bulb.
-Keep flammable material away from the lit bulb.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA
Page 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SK TRIPLE GOURD LAMP and is the answer not in the manual?

Questions and answers

Summary of Contents for Suzanne Somers SK TRIPLE GOURD LAMP

  • Page 1 Customer Service: 800-367-2810 SUZANNE KASLER Online: www.ballarddesigns.com BALLARD DESIGNS PRODUCT NAME: SK Triple Gourd Lamp ITEM NUMBER: LA186 DIMENSIONS OF ITEM ASSEMBLED: 28 1/2”H x 18” DIA IMPORTANT SAFETY INSTRUCTIONS: -This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
  • Page 2 NOTE: Remove all parts and hardware from the box along Lamp Shade with any plastic protective packaging and carefully lay all the parts out on a clean, flat surface. DO NOT discard any contents until after assembly and Harp installation is complete to avoid accidentally discarding small parts or hardware.
  • Page 3 NOTE: Before starting assembly of this Lamp, be sure it has been unplugged. Turning the switch off is not sufficient enough. STEP 1: Squeeze the Harp (C) ends into the Saddle Saddle of the Lamp Body (A). STEP 2: Place the Shade (B) over the Harp (C) top. Secure it on top by screwing on the Finial (D) until it is snug.

This manual is also suitable for:

La186

Table of Contents